We just got in 3 cases of 2013 HK calendars. So for those of you who still want one or would like an additional for your collection, I'm doing a photo contest on Instagram. Search for tag #dtcontest1 for more details.

If you dont have IG, dont worry as I'll be doing one on Facebook soon.

Thanks all for your support and thanks HK for the calendars!

$25,000 for a Knights trigger box? lol.

You can buy new sears and new DLO boxes both for less than that.

In another year or two? Sure. But now? That person overpaid. I understand if it's impossible to find the other options out there, but new DLO boxes and sears can still be found pretty easily. Whatever...

HK trigger box by Knights : Machine Guns at GunBroker.com

Could someone who has one handy please measure the overall length of their MP5k reverse stretch with F-A3 stock (collapsed) and 3-lug barrel?

I know a few of you have this set-up, since your pictures of them posted here is what inspired me to build mine.

I ask because mine is at my gunsmiths to get a picatinny rail welded to the top, and I'd like to get a Pelican 1495 case for it, but don't know if it will fit.

Vielen Dank.

Well, those that side my family pic thread will know that I just picked up a USP45 Tactical! I love the gun, but I'm not fond of the adjustable sights. I could live without tritium but they're not even dot sights! I'd really like to replace them, and with adjustable night sights- preferably tall ones like the current ones. What would you folks suggest? I'm only aware of the green/green ones from Meprolight...is there anything I'm missing? The Trijicon HDs are nice but I can't see going to fixed sights with a tack driver like this Tactical.

Also, has anyone sent theirs in to have vials installed in stock sights? I can't remember the company that does this but it's bookmarked, so I can find it. Has anyone had it done? I realize it wouldn't save any money but the target/tactical sights are otherwise very nice.

Thanks!

Are you going to be stocking the 922 trigger combo for the HK33/93? Thanks.

My MM23E is going to be delivered on Thursday, and I am super excited about it, and I'm trying to decide what optic to put on it. It has the Coast Guard rails, and the rail in front of the rear sight, so mounting options are easy.

As far as what I usually run....I do not have an magnified optics on any gun that I own, except for my tack driver. Everything else, I prefer irons or if optics, just red dot sights. All of my ARs have Aimpoint T1 micros on them. I have a couple Trijicon RMRs on various other guns. My Integrally suppressed Ruger 10/22 has a T1 Micro on it. Lastly, my only other full auto beltfed that I own (M60 E4) has an Eotech sight on it.

I was thinking on just slapping yet another Aimpoint T1 Micro on it, but that seems like it may be too small of an opening? That's one reason I have an Eotech on the M60. Would an Eotech look to large on an MM23E?

Really, just looking for pictures of red dots and Eotech on them, and also opinions on what you think would be good. Thanks for all of your help and suggestions!

Used / trade-in USP 40 at Palmetto State Armory for $450:

H&K USP 40S&W 3 High Capacity Mags Night Sights V3

H&K USP 40S&W 3 High Capacity Mags Night Sights V3 USED - H&K - Handguns - Firearms

After putting the first 200 rounds through my FDE HK45C, I finally got around to installing the light LEM trigger setup. Everything went smoothly and easily, but I did notice a potential issue with the gunlock pin (cylindrical pin in parts diagram) during disassembly/reassembly. The first thing I noticed after removing the back strap was that the gunlock pin appeared to not be fully inserted. Although one edge of the pin was resting flush with the corresponding hole in the frame, the other edge didn't even reach the other frame hole. So, the pin was only securing the gunlock to one side of the frame mount and was sitting crooked as a result. After removal of the pin, I noticed the pin holes in the lock/frame were wallowed out slightly from the partially inserted pin, but nothing too bad.

When I reassembled, I tried to center the pin so that it rested in both holes of the frame, but this wasn't easy. There really isn't that much pin resting in the frame holes. Like I said before, with the pin flush on one side, it doesn't even reach to the other side.

Does this sound normal to you guys? I can see no mechanical advantage to using such a short pin in this location, especially when the parts being joined are plastic. I realize that the site probably doesn't bear that much load from the hammer strut, but I'm considering replacing the pin with a longer one. It bothers me that the pin either came from the factory resting out of position or worked its way out after less than 200 rounds.

Any thoughts?

Which one would you buy or would prefer ..or should i say buy first since i know some smart ass will say both
And ill throw in some rules. ...no sear capability points since i dont have one.
And no g36 conversion. ..
Only possibly upgrade allowed woud be stock upgrades for both of some sort. ..retractable or.folding and hi capacity mags. 922 compliant of course :/

I would ike to hear your opinions. ..ive shot neither

As the title says. I'm looking for a full size USP 9/40 trigger bar. Please let you know if you have one.

No Jet funnel, starts 1300 no reserve.

H&K USP ELITE in 9mm : Semi Auto Pistols at GunBroker.com

Not sure if this has been posted in the past, but I just seen it on the Military Channel, pretty cool!
HK-417 Rifle | Combat Countdown - YouTube

Using a thumbs high/forward grip, I'm unknowingly contacting the P30's slide release on each shot, which causes the slide to not lock back on the last round. To those that use a similar grip, and who have been fortunate enough to shoot the 45c, P30, and/or P2000, how do these different guns compare in that regard? I'd imagine the P30's would be easier to trip, given the longer release lever. Thanks.

I am looking for a FTF in the DFW, TX area. If I don't get any "takers" I may open it up to shipping later. Here's what I have:

H&K P30S V3 .40 cal with Meprolight night sights. Superb condition showing no exterior wear, scratching, etc. (the spots in the photo is oil). It comes with original case, two 13rd mags, manual, lock and grip panels. AK date code (2009). I am the second owner and the round count is approximately 500-600.

$800.00 firm. Trades: Really the only thing I am looking for is a 1911 in .45 (full size or commander). I am partial to the Springfield TRP, MC Operator and so on. That's about where I would want to start considering 45's and then move into the higher end offerings. However, if you have something else you want to propose (in the way of other firearms) I will listen and politely decline if I can't use it. I might be tempted by a P7M8, as I once carried one on duty and wish I had it back. Plus cash on my end for what I am looking for of course...

Please PM any questions or trade offers.