My USP40 needs help from the professionals... :)

[MaverickH1]

My USP40 has the following modifications (all self inflicted):

HK factory threaded barrel
Jet Funnel and mags
Match Trigger
CCF carbon fiber suppressor
Ambidextrous control levers.

A lot of problems have come from this setup. In no particular order:

- It sometimes fails to feed with the suppressor. It was common knowledge that the tactical recoil assembly was a bit different than the standard USP recoil assembly. Nobody on this forum knew how they were different, however. P'haps that is my problem. I also suspect that it might be weak mag springs in the jet funnel magazines. Of course, it could be a problem with the suppressor as well.
- The control lever was never smooth after I installed it. I definitely just threw it back together and figured it would smooth out. It never did.
- The flat spring popped out during a range session. I thought that was an easy enough spring to install. I was wrong, apparently. :)

All of these, from my perspective, are non-warranty issues, of course. I'd love to have it stripped and checked by the professionals. My match trigger kit actually didn't come with a hammer, and I was sent one. I might have been given the incorrect hammer... I have no idea. I just want someone who knows to take care of it.

I need to get this thing back on the range!

[HK CS1]

Please contact a Customer Service Rep. at (706)568-1906 to provide all of your information (name, street address, etc...) so that we can generate a Return Authorization #.