LinkBack URL
About LinkBacks
Reply With QuoteThanks for the pics. Wouldn't the P2000 Serpa holster work/fit the HK45c better?
PICS of my HK45C with Blackhawk CQC Serpa P30 holster....
Purchased the Blackhawk P30 carbon CQC holster with Serpa lock $40 from a PA dealer near the border of Delaware. This dealer is a Hk Master Dealer and has some good stuff at very reasonable prices. For example, HK45 mags at $44.95 ea.
This is a pic of the pistol and holster separately:
Pistol inserted:
Gun in holster at various angles:
The holster is a ~90% fit. Due to the fact that the trigger guard on a P30 and the HK45's are different. As a result, the gun 'rocks' or 'pivots' *ever so slightly* forward and back, like approx. 3 degrees or so, while inside the holster. There is not much play and unusual wear problems on the gun. If it does rub, it would be on the forward extremity of the slide which you could grease the inside of the holster a bit to help. But really, splitting hairs here, not much of an issue at all...
Holster operation: The Blackhawk P30 works nicely with the HK45, as it retains FULL function of the Serpa lock, even with the different trigger guard designs between the P30 & HK45. The gun drops into the holster nicely with no unusual or excessive resistance at all, like dropping nails into a bucket, as a matter of fact, I had to tighten up the detent screw a bit.
Of course the gun is a tad bigger than the P30, but it still works, carries, draws, and holsters very well.
Basically, for work or range, it will do for now, until model specific holsters come out for these guns.
Last edited by quikz; 06-12-2008 at 01:50 AM.
HK45 Compact - V1 (German)
Hk P2000 LEM - .357SIG (LE)
Hk P2000 LEM - 9mm
Sig Sauer P226 - 9mm (W. German)
Rossi R462-R2 2" - .357 Magnum
Hk -Fabarm FP6 12 ga. pump
Saiga 7.62 (AK100 series variant)
Saiga .308 (AK100 series variant)
Thanks for the pics. Wouldn't the P2000 Serpa holster work/fit the HK45c better?
Negative...The P2000 CQC holster w/ Serpa lock WILL NOT FIT.
You are required to completely remove the detent screw. Then, you have to forcibly jam the HK45F/C into the P2000 holster.
IF it goes in all the way, it might NOT come back out after the Serpa lock grabs the trigger guard. This is from experience...
The P2000 holster is WAY too small for ANY HK45 or HK45C.
Do you think that you can PM me or just post the PA dealer info? I.E. Name, #, and address if you have it? I'm in DE until July and I would really like to hit up a nice gun store that really supports HK
Jay
Thanks for the info. Also interested in the name and location of the Store.Originally Posted by quikz
Sure folks, no prob...
The store is: http://www.targetmaster.com/
They have a "high emphasis" on Hk products, shall we say. Pistol prices are 'ok', but they stock Hk stuff and rent FULL AUTO Hk sub-guns for their indoor range. The staff is courteous, knowledgeable, professional.
Awsome thanks for the quick reply! I look forward to checking it out... do you know if I'm going to have any legal problems transporting my P30 from DE to PA?
Jay
People from Delaware to PA & PA to DE shop there ALL THE TIME. The store is RIGHT on the border. There was an 'interstate' customer who was buying there last I was there. Just give them a call. They should be very familiar with the whole process.
I will be returning there (3) Sundays from today. I sometimes tell them what I want, they set it aside, then I come in and pick it up in person later on.
As a side note, they are liquidating NICE, Hk black factory tactical pistol cases (large sized), for $50 ea. I saw these and they were VERY nice.
Last edited by quikz; 06-12-2008 at 07:21 PM.
I'm going to give them a call and head up there today.
Jay
The guys are TargetMaster are great. Ask for Joey...I've bought all my HKs for him!
Posting Permissions
