+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: HK21 Parts Kit Gonna Meet Her Maker!

  1. #1
    HKPRO PREMIUM PARTNER
    corey8534's Avatar
    Join Date : Nov 2004
    Location : Texas
    Age : 39
    Posts : 818

    Default HK21 Parts Kit Gonna Meet Her Maker!

    After 2 years of collecting, finding a partial HK21 parts kit, shroud kit from BeltFed, Inc (Carlos in CA.) I'm finally ready to send my parts off to Mike at TSC Machine. I'll try to brake down all the parts for everyone.

    HK21 Parts Kit
    • FMP Barrel
    • FMP Feed Mech
    • FMP Trunnion
    • FMP Feed Box
    • FMP Trigger Group
    • German HK Complete Bolt Carrier Group

    Beltfed Inc (Carlos in CA)
    • "E" Type Shroud
    • "E" Type Weldments
    • HK21 'T' Rails

    Parts I've Collected

    • German HK21E Butt Stock Assy - Thanks Gordon
    • German HK21E Recoil Buffer - Thanks LEED
    • German HK21E Cocking Tube - Thanks Phil
    • German HK21E Barrel Handle - Thanks Adam
    • German HK21E Carrying Handle - Thanks Mickey
    • German HK21E Cocking Handle - Thanks GunBroker
    • German G3 Burst Pack Housing - Thanks Gordon
    • German 3rd Gen 1200 Meter Sight - Thanks GunBroker
    • US HK21E Forward Assist (RDTS) - Thanks Mickey
    • MSG90/HK21E Sight Tabs - Thanks JFK

    The host gun will be a German HK91 IC Date Code Rifle. I still need some parts. If you have any of these parts please let me know. These are not deal breakers but I do need to get these at some point.

    • 4th Gen 1200 Meter Sight
    • BiPod
    • HK21E Belt Box
    • HK21E/MSG90/G41 Scope Mount
    Let me know what you think. If I'm missing something or you fell I should do something different please let me know.











    Thanks for looking.

    -Corey
    Last edited by corey8534; 02-23-2010 at 02:42 AM.

  2. #2
    Member

    Join Date : Feb 2010
    Location : Marysville, Washington
    Posts : 54

    Default

    How much do you have invested in parts?

  3. #3
    HKPRO PREMIUM PARTNER
    corey8534's Avatar
    Join Date : Nov 2004
    Location : Texas
    Age : 39
    Posts : 818

    Default

    I have about $5000 in parts and another $2000 for the HK91 Host gun. It's not for the faint of heart!

  4. #4
    Desperately Needs Treatment
    paul123's Avatar
    Join Date : Jul 2004
    Posts : 1,560

    Default

    Not Bad Corey!!!!

    thats going to be one fine looking weapon when its all put togeather, you got some clean looking 21 parts.

    i feel you pain on the cost im into my E gun for 9300$ and i still need a approval letter for my receiver (waiting patiently), 4th gen sight and a bipod.
    "Who Dares Wins"

  5. #5
    Desperately Needs Treatment
    Roger's Avatar
    Join Date : Dec 2000
    Posts : 1,596

    Default

    I would go with Carlos' sight tabs as his are identical to the factory ones, and the rear is one piece, unlike the one you have shown would have to piece the front and rear together.
    Last edited by Roger; 02-24-2010 at 02:55 AM.

  6. #6
    Desperately Needs Treatment
    paul123's Avatar
    Join Date : Jul 2004
    Posts : 1,560

    Default

    roger my E gun will be semi also (stuck in CA) im waiting for an approval for my semi hanger.

  7. #7
    HKPRO PREMIUM PARTNER
    corey8534's Avatar
    Join Date : Nov 2004
    Location : Texas
    Age : 39
    Posts : 818

    Default

    " Not bad at all Corey. I would say go with a first gen bipod and keep your old 1200 meter sight. I would go with Carlos' sight tabs as his are identical to the factory ones, and the rear is one piece, unlike the one you have shown would have to piece the front and rear together. It can be done, but if you have spent that much $, you might as weel spend a few more! "

    I got the sight tabs from JFK. They look great and I would like to use them for my HK21 or a future MSG90 build. Should I get the one piece tabs from Carlos? or should I use what I got?

  8. #8
    Desperately Needs Treatment
    csbrit007's Avatar
    Join Date : May 2004
    Location : Gunshine State
    Posts : 1,192

    Default

    Looks great Corey! I too have some of JFK's tabs to use but after checking out the one piece rear Carlos makes I might switch over to that instead of piecing together the rear parts.

    I noticed you have the recoil spring but no rod assembly. I believe Mike uses a modified version of the E recoil rod in his builds but you might want to make sure before buying the parts.

    Is Mike going to mill your original SEF pack selector location to fit the burst housing or are you going to be sourcing an ambi pack later on?
    Last edited by csbrit007; 02-23-2010 at 02:42 PM.

  9. #9
    HKPRO PREMIUM PARTNER
    corey8534's Avatar
    Join Date : Nov 2004
    Location : Texas
    Age : 39
    Posts : 818

    Default

    I'll be calling Carlos about the sight tabs. I don't want to cut any corners at this point. The spring in the picture is for an original 21. I figured Mike would want to make his own rod.

  10. #10
    Desperately Needs Treatment
    paul123's Avatar
    Join Date : Jul 2004
    Posts : 1,560

    Default

    corey if you'de like i can post a pic up tonight of what carlos's tabs look like in detail.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Links

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Search tags for this page

hk 21 part kits for sale
,
hk 21 parts
,

hk 21 parts kit

,
hk 21 parts kit for sale
,
hk21
,
hk21 for sale
,
hk21 kit
,

hk21 parts

,

hk21 parts kit

,
hk21 parts kit for sale
,
hk21e for sale
,
hk21e parts kit
Click on a term to search for related topics.