Although not a 10", I have had excellent results in my 14.5" guns with 69gr factory Lapua HPBT as well as the 77gr OTM Black hills offerings. I do have some Mk262 on the shelf, but I have yet to use it with a 416 upper.
What have you guy found to be the most accurate ammo for your 10 inch 416?
Although not a 10", I have had excellent results in my 14.5" guns with 69gr factory Lapua HPBT as well as the 77gr OTM Black hills offerings. I do have some Mk262 on the shelf, but I have yet to use it with a 416 upper.
Sellier&bellot 55gr at 110 yards with my MR223 14.5 inches and ACOG TA31RCO
By marmoud at 2012-05-09
i ll try RUAG SS109 62gr the next week if i can do better results
I've had good luck with Blackhills 77 & 68 grain loads.
HK91
HK94
USC/UMP
SL8/G36
P7M8
P9s .45acp
VP70Z
USP Tactical .45acp
V51/HK51 clone
HK45
HK45c
HK 416 10.5" upper
GSG5PK
Thanks for the input guys! Looking forward to hearing how the 62 grain shoots for ya marod!
The IMI 55 grain BTHP Match round (if you can find it) shot sub 1 MOA groups at 100 meters from a 10.4" HK416 in a test fixture after firing 12,000 rounds during lot acceptance testing in 2004. Not sure if this is available in the US but it was by far the most accurate round from that platform, even better then the 77 grain MK262 round from Black Hills.
G3Kurz
with RUAG SS109 62gr ,i have the same results at 110 yards than the sellier&bellot 55gr
i ll try 55gr fiocchi later
The military did a test a few years ago on the 5.56 in a SBR. It showed that the heavier grain bullets had better accuracy. Not going to get into which brand is better, just passing on the info.