PTR C93 & Buffers
Results 1 to 9 of 9

Thread: PTR C93 & Buffers

  1. #1
    Junior Member

    Join Date : Dec 2018
    Posts : 4
    Mentioned
    0 Post(s)

    Default PTR C93 & Buffers

    I have a PTR C93 and got a PTR stock to put on it but don’t know if it needs a buffer. I think my bolt carrier has a buffer (it has the D-shaped plunger on the back). If the BC is buffered is the stock alright to be unbuffered?

    I got this backplate: https://www.hkparts.net/shop/pc/HK-9...-170p16254.htm

    And this stock: https://www.hkparts.net/shop/pc/Cent...US-114p379.htm

    Also, can I just screw the backplate directly into the stock or is there something else that should go in there?

  2. #2
    Unrepentant HKHolic
    HKaltwasser's Avatar
    Join Date : Feb 2009
    Location : Dripping Springs, Tx- Just west of weird.
    Posts : 2,230
    Mentioned
    9 Post(s)

    Default

    You're good to go. The D shaped object protruding is your buffer. You can use that backplate with a stock and just screw it in with the two screws.

    This will save ya 50.00 . https://www.robertrtg.com/store/pc/H...E-119p2924.htm
    Last edited by HKaltwasser; 03-29-2019 at 05:40 PM.
    A voice from the past whispers in my ear, “Brethren, keep your powder dry.”

  3. #3
    Unrepentant HKHolic
    ecsuser's Avatar
    Join Date : Oct 2009
    Location : Rochester, MI
    Posts : 3,069
    Mentioned
    22 Post(s)

    Default

    Quote Originally Posted by Gbron View Post
    Quote Originally Posted by HKaltwasser View Post


  4. Remove Advertisements
    HKPro.com
    Advertisements
     

  5. #4
    Senior Member
    crimedogs's Avatar
    Join Date : Jan 2018
    Posts : 142
    Mentioned
    0 Post(s)

    Default

    I am looking to get the RTG stock also to replace the all poly stock on my ptr/C93 which fits poorly.
    Was wondering...is the RTG stock longer than the all poly ptr stock or are they the same length? Also can the contract HK 21 rubber buttpad extension RTG sells for the G3 be installed on these?
    Last edited by crimedogs; 03-29-2019 at 06:58 PM.

  6. #5
    Unrepentant HKHolic
    ecsuser's Avatar
    Join Date : Oct 2009
    Location : Rochester, MI
    Posts : 3,069
    Mentioned
    22 Post(s)

    Default

    Quote Originally Posted by crimedogs View Post
    I am looking to get the RTG stock also to replace the all poly stock on my ptr/C93 which fits poorly.
    Was wondering...is the RTG stock longer than the all poly ptr stock or are they the same length? Also can the contract HK 21 rubber buttpad extension RTG sells for the G3 be installed on these?
    Just shoot Robert a message or email him. By the way, his backplate fit perfectly on my C93p.

    https://www.hkpro.com/forum/members/393.html

  7. #6
    Senior Member
    crimedogs's Avatar
    Join Date : Jan 2018
    Posts : 142
    Mentioned
    0 Post(s)

    Default

    Thanks, good to know they should fit a century reciever,I think PCS makes them from G3 backplates for RTG

  8. #7
    Unrepentant HKHolic
    ecsuser's Avatar
    Join Date : Oct 2009
    Location : Rochester, MI
    Posts : 3,069
    Mentioned
    22 Post(s)

    Default

    Quote Originally Posted by crimedogs View Post
    Thanks, good to know they should fit a century reciever,I think PCS makes them from G3 backplates for RTG
    That is correct.

  9. #8
    Unrepentant HKHolic
    HKaltwasser's Avatar
    Join Date : Feb 2009
    Location : Dripping Springs, Tx- Just west of weird.
    Posts : 2,230
    Mentioned
    9 Post(s)

    Default

    Quote Originally Posted by crimedogs View Post
    I am looking to get the RTG stock also to replace the all poly stock on my ptr/C93 which fits poorly.
    Was wondering...is the RTG stock longer than the all poly ptr stock or are they the same length? Also can the contract HK 21 rubber buttpad extension RTG sells for the G3 be installed on these?
    I'll check length here in a sec and yep the pad will fit.

  10. #9
    Senior Member
    crimedogs's Avatar
    Join Date : Jan 2018
    Posts : 142
    Mentioned
    0 Post(s)

    Default

    Thanks!
    I measured approximately 10” from the pin center to the end of the all poly stock as supplied with the C93 .I’m looking to get some eye relief and the extended pad adds like 1/2” or more to overall length.

Sponsored Links

 
 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •