HKParts Clipped and Pinned Housing won't fit PTR 9C
Results 1 to 9 of 9

Thread: HKParts Clipped and Pinned Housing won't fit PTR 9C

  1. #1
    Junior Member

    Join Date : Mar 2011
    Posts : 7
    Mentioned
    0 Post(s)

    Default HKParts Clipped and Pinned Housing won't fit PTR 9C

    Just picked up a HKParts German Clipped and Pinned SEF housing to use on my Form 2'd Auto Trigger Pack. The new housing won't fit. There is a gap between the housing and the mag well area so the rear pin hole doesn't line up.

    I searched previous threads and people saying needing to dremel/file to fit the housing to the PTR 9CT. Can anyone show me which parts to actually remove on the housing? Or how to get started?

    Thanks,
    K

  2. #2
    Very Senior Member
    convert53's Avatar
    Join Date : Jun 2007
    Location : Oregun
    Posts : 348
    Mentioned
    1 Post(s)

    Default

    You should see mill machine marks where the space between the glued in pin parts was widened, the small radius of the tool should be evident?. I figured that was the rub so I used sharpie on it and then tried to put it together, where it removed the sharpie is where I dremeled. Just a little at a time. I also filed off some of the paint on the side of the receiver shelf.
    Form 2 pack, can you elaborate??


    Sent from my iPhone using Tapatalk

  3. #3
    Junior Member

    Join Date : Mar 2011
    Posts : 7
    Mentioned
    0 Post(s)

    Default

    I'm a 07/02 FFL SOT

  4. Remove Advertisements
    HKPro.com
    Advertisements
     

  5. #4
    Very Senior Member
    convert53's Avatar
    Join Date : Jun 2007
    Location : Oregun
    Posts : 348
    Mentioned
    1 Post(s)

    Default

    Oh


    Sent from my iPhone using Tapatalk

  6. #5
    Junior Member

    Join Date : Mar 2011
    Posts : 7
    Mentioned
    0 Post(s)

  7. #6
    Very Senior Member
    convert53's Avatar
    Join Date : Jun 2007
    Location : Oregun
    Posts : 348
    Mentioned
    1 Post(s)

    Default

    Nice, I imagine it takes some $$$ and effort to attain SOT cert.s ??


    Sent from my iPhone using Tapatalk

  8. #7
    Gets the Shakes if No HK Contact in 24 Hour Period

    Join Date : Jan 2008
    Location : Coastal SC
    Age : 61
    Posts : 621
    Mentioned
    0 Post(s)

    Default

    Will the housing (grip frame) alone fit the receiver without the trigger pack installed? If yes, I am betting it does fit sans the trigger pack, then it's the trigger pack itself.

    You have not trimmed the trigger pack properly to fit the host's semi receiver shelf.

  9. #8
    HKPRO PREMIUM PARTNER

    Join Date : Dec 2002
    Location : Northern Virginia
    Posts : 624
    Mentioned
    2 Post(s)

    Default

    I just received one from HKparts that was tight on a factory 93. It required pointing the receiver muzzle down and pushing the housing forward onto the magwell. Then the stock went on tight.

  10. #9
    Junior Member

    Join Date : Mar 2019
    Posts : 42
    Mentioned
    0 Post(s)

    Default

    I had this same problem with my PTR 9CT and an HK SEF housing. After dremiling and some force I was able to get the housing to fit, but the gun began to randomly FTF. I just swapped back to the factory housing and need to go back to the range and test. One thing I like better about my Zenith is the HK parts fit without issue so far. PTR, not so much.

Sponsored Links

 
 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •