LinkBack URL
About LinkBacks
Reply With QuoteThat's all there is , spring goes on guide rod, rod goes in jet funnel cutout, pin goes through funnel.
Jet funnel install possible issue?
As I was removing the little black piece, the blue (hammer spring??) shot across the room, I need to know if anything else is there that may have shot and I am now missing it?
I put the blue spring back on that rod, and installed and pinned the new back piece which comes with the jet funnel.
It seems to be fine, but need to know from The experts in here if I may have lost a piece which was on top of the blue spring.
Thank you,
FAMILY, faithfulness, compassion, honesty, empathy, trust, hockey, single malt Scotch 21+, Heavy Metal music, German, Irish, Belgian, English bier, what else is there...?
That's all there is , spring goes on guide rod, rod goes in jet funnel cutout, pin goes through funnel.
HK USPc 357 Sig (match trigger)
HK VP357 Sig (40 with RCM 357 barrel) (match trigger)
HK USPc 40 with German 357 barrel installed (match trigger)
Walther P99 AS (Many 9mm and 40)
Class 3 Colt M4
Class 3 Colt Commando
Class 3 HK MP 5
Originally Posted by Rockets
Thank you @Rockets .
Now I can stop worrying, and wait for those clear plastic mags to get here.
"Thank you"
|
|
Nope that's it. Use thread tape (teflon tape, plumbers tape, or whatever you want to call it), to secure the screw that holds the JF in. It will back out over time if you don't.
The beatings will continue until morale improves.
Thank you, I will use a thin layer,(1 revolution) of teflon tape to secure the screw. Thank you !!!!!
Posting Permissions