Check this thread out (it links to other informative threads).
Last edited by dwd1985; 06-13-2018 at 03:57 PM.
I did my P2000SK myself... check the thread above as it is very good. Make sure you have the right pliers for the TRS - that one spring took me 75% of the time! The rest is fairly easy and straight forward.
HK VP9, P2000SK 9mm, P2000 9mm, 45c, USP 45 SS (sold), P30L, Mark 23 & PCS 9
"A nation of sheep will beget a government of wolves." ― Edward R. Murrow
Here is the spring chart...I believe it is courtesy of TooSixy.
Sent from my iPhone using Tapatalk
I can still count my hk's with one hand....I just gotta start over once or twice.
The trs spring is really what makes the difference
TRS is one that requires a special tool (sold on HKParts.net), or just a pair of long-needle pliers and a vise. The FPBS requires just a roll-pin punch and a hammer.
Good counsel being provided above. Recently performed the v2 to v1 change myself on my p2ksk.
A couple suggestions to reinforce the above:
1) Would suggest the TRS pliers/tool provided on hkparts.... I didn't have it and struggled - even with the narrowest of needle nose pliers.
2) If at all possible, employ a vice to hold the frame and use a bright light to assist with seeing down into the trigger mechanism.
As stated, the FPBS was a quick/easy changeout... The TRS will take more time... Just be patient.... Don't rush - It will all come together.
And when you're done - you'll feel like a machine.