Stock Identification?
Results 1 to 7 of 7

Thread: Stock Identification?

  1. #1
    Junior Member

    Join Date : Aug 2019
    Posts : 4
    Mentioned
    0 Post(s)

    Default Stock Identification?

    Good evening gentlemen, I have a PTR 91 with a stock I cant seem to find anywhere and was wondering if anyone had info. The buttpad is screwed on by 2 screws on the side and there are no holes for the pins. The finish seems meh too.
    Attached Thumbnails Attached Thumbnails Stock Identification?-20190822_222450_1566530771700.jpg  

  2. #2
    HKPRO PREMIUM PARTNER

    Join Date : Oct 2011
    Posts : 851
    Mentioned
    16 Post(s)

    Default

    It's a US-made aftermarket Bell and Carson.
    https://www.gunpartscorp.com/products/1838480
    Own: HK91, SR9, SP5k, G36k, HK416, P30L, 2x P8, 2x P8A1, USP9
    Future: Done, until HK comes out with something new & nifty. Might start building an FNH collection.

  3. #3
    Junior Member

    Join Date : Aug 2019
    Posts : 4
    Mentioned
    0 Post(s)

    Default

    Oh ok, thank you.

  4. Remove Advertisements
    HKPro.com
    Advertisements
     

  5. #4
    AGG
    AGG is offline
    Unrepentant HKHolic
    AGG's Avatar
    Join Date : Feb 2007
    Location : Alabama
    Posts : 30,094
    Mentioned
    160 Post(s)

    Default

    Welcome to the site!!!

    Tony

  6. #5
    Junior Member

    Join Date : Aug 2019
    Posts : 4
    Mentioned
    0 Post(s)

    Default

    Thanks, lifetime love of the platform but took a few years to afford it!

  7. #6
    HKPRO PREMIUM PARTNER

    Join Date : Oct 2011
    Posts : 851
    Mentioned
    16 Post(s)

    Default

    Quote Originally Posted by MrPie68 View Post
    Thanks, lifetime love of the platform but took a few years to afford it!
    On the upside, if I am not mistaken all the bell and Carson stocks use a slightly beefier recoil assembly.

    Much like, if not identical, to the msg90.

  8. #7
    HKPRO PREMIUM PARTNER
    HKaltwasser's Avatar
    Join Date : Feb 2009
    Location : Dripping Springs, Tx- Just west of weird.
    Posts : 2,121
    Mentioned
    9 Post(s)

    Default

    Quote Originally Posted by MrPie68 View Post
    Good evening gentlemen, I have a PTR 91 with a stock I cant seem to find anywhere and was wondering if anyone had info. The buttpad is screwed on by 2 screws on the side and there are no holes for the pins. The finish seems meh too.
    I don't think that's a Bell &Carlson, the B&C stock extends below the backplate and is just chunkier around the backplate. My guess would be a Century Arms stock.

    Notice how it goes around the backplate and the B&C stocks have a rubber butt pad that's thinner.

    Last edited by HKaltwasser; 08-24-2019 at 10:16 PM.
    "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." — George Washington

Sponsored Links

 
 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •