BURST PACK EJECTOR CHANGE HELP
For you full auto HK guys this is probably a stupid question!!!
I'm pretty new to HK full auto as they just recently opened up Michigan for transferable stuff. I have an MP5 that is a dedicated reciever gun as well as a registered sear trigger pack. Both are burst style packs. The registered sear trigger pack has a .223 ejector in it currently and is installed in a 93 style weapon. Both the guns run awsome. I want to convert the .223 to 9mm so I can shoot it in one of my 94's for bowling pin matches indoors this winter. I already have the FA carrier/bolt assembly from a MP5 parts kit I obtained awhile back. The FA carrier/bolt assembly runs great semi in my 94 with the 94's semi auto pack. My problem is getting the burst pack taken apart to change the ejectors. It has an ambi style selector (levers on both sides of housing) and does not come apart like I am accustomed to with my 94 that has a single selector lever on the right side of the pack. Is there some trick to getting the pack out of the housing to change the ejector? I don't want to proceed further until I know what I am doing.
Any help or direction will be greatly appreciated.
Kattman from Michigan