Coharie SD suppressor possible problem...

So I'm guessing this SD suppressor wasn't made to be taken apart and cleaned.

Quote:

---

Originally Posted by ybnqskp

So I'm guessing this SD suppressor wasn't made to be taken apart and cleaned.

---

Most just take apart the muzzle end with a spanner.

OP- make sure you scrub that loctite out good, I reccomend using mineral spirits and a wire brush after most of its out, to make sure all the residue is gone. I too, would use Rocksett, instead of loctite.

Quote:

---

Originally Posted by 4C Dragon

No info about that particular suppressor, but I recommend using "RockSet" instead of red loctite. Rockset works very well and the part can be boiled in water for 5-10 minutes and it releases.

---

I never heard the boiling water part but I did use a variation on the theme on a stubborn flash hider. I used hot water (which quickly cooled) overnight to loosen the Rockset. In the morning the Rockset had literally melted and flowed out enough that I could get it loose. 10' sounds better to me.

http://i76.photobucket.com/albums/j1...smllnpcze.jpeg

http://i76.photobucket.com/albums/j1...psrxvqcv2g.png


Sent from my iPad using Tapatalk

Sorry it took so long, I had to relearn how to post photo's. As you can see the can looks pretty "rough". That's the way it came from Coharie. FWIW it looks to me like you have a gap, where I do not. Let me know if there's anything I can do to help.


Sent from my iPad using Tapatalk