Find an LEM P30, give that a try, it's magic.
VP9 - times 4
HK45 V1 German Made
HK45 V7 US built
HK45 V1 US built
HK45C V7 OD
HK 45C V1 German Made
Try a P2000. Smaller grip than the USP but not as ergonomic as the P30.
Leave your VP9 alone and focus on the DA pull on a hammer gun. You need to pull quickly through the trigger, only when you are focusing on the trigger does it feel “too long”. No DA hammer fired gun is going to match a VP9 trigger.
If you can master a DA trigger pull, you can shoot just about any trigger well.
Good Luck and be safe!!
Sent from my iPhone using Tapatalk
Yes, I will have to leave my VP9 in order to master the DA hammer trigger. I wish I had started with a hammer first, maybe this wouldn't be so difficult! I have been on the HK site several times comparing the pistols available, and they all look great! I was able to "test fire" a P30 (5 shots) and thought it was pretty nice, I just wasn't nearly as accurate with it as with the VP9. Again, I know this is going to take some real practice. I think I'm going back to rent it for a full range run. I will check out my LGS/range again to see if they have any other HK's, but they primarily have striker fired pistols. I would love to try that P30 LEM...that sounds like the best answer. The USP LEM's 7.5lb trigger break might be a bit much for me.
Although I'm a USP fan (and owner) sounds like the P30 with light LEM is the way to go. See if there's a local gun show in your area or a meet up. What region of Ohio? N, S, E ,W...?
Is it possible to convert a P30 V3 to a LEM and if so, is it worth it (cost to make the change)?
Thank you. But let's say I could score a new v3 for around $450....can that be converted to v1 and would it even be cost efficient?