That's all you need.
And found a 260204 LEM kit from a friend.
If that's right then just the new style catch, as well. And I'm used to working on internals of CZs Tanfo, etc., so I feel alright going into this.
Parts sound right? Anything else recommended? Thanks again for all this help.
Ordered and all on its way! I'll report back with the after pix! Thanks again for the help.
And as Toosixy usually mentions, while you’re at it, might as well put in the nickel flat spring. ;)
”What do you want to discuss now, my favorite color?”–Col. Nathan R. Jessup
I'm not familiar with that. (And just ordered everything. ) What's it for?
“HK Pistol "Nickel Plated" Match Flat Sear Spring - German HK
The nickel plated sear spring is also regarded as a "match" flat spring as it will improve the feel and "smoothness" of the feel when pulling the trigger as it takes up some of the gritty feel. A great improvement and upgrade to any HK pistol. This is a common wear and replacement item on your HK pistol. A great spring to have on hand as they are not common or repairable.
A must have upgraded part to replace the stock "black" flat spring with the Enhanced Match Flat Sear spring. A drop in upgrade for all of the pistols below:
Fits all of the following HK pistols:
• HK USP 9mm, 40 & 45 models
• HK USP Tactical, Elite, Expert models
• HK USP Compact 9mm, .40, .45 & .357 Sig models
• HK P2000 9mm, .40 & .357 Sig
• HK P2000SK 9mm, .40 & .357 Sig
• HK P30, P30S, P30L, P30SK
• HK45, HK45 Tactical
• HK45 Compact, HK45C Tactical”
Thanks. I'll check it out. Looks worth doing while everything else is getting done.
Everything ordered and on its way. Friend ended up not having it but found a LEM kit at All State Police. I'll be back to report when it's all here and installed. Might have to make this a full Lara Croft USP at this point. There goes more $...
Hopefully a quick question - thanks in advance for any help - received my universal kit, new sear spring and new style catch for my USP9mm full size var 5.
I know with var 1 if you want light LEM you keep the old FPB spring and TRS. Is the same true in this case with a DAO to start with? Any advice is appreciated. Will hopefully do this today!
(This is a USP 9 full size var 5. I plan on keeping the safety so I'll keep and use the detent plate.)
You have to replace all 3 springs that came with your DAO if you want a Light LEM.