417 vs MR762 receiver pin holes?
Results 1 to 7 of 7

Thread: 417 vs MR762 receiver pin holes?

  1. #1
    HKPro Professional

    Join Date : Nov 2006
    Location : Pennsylvania
    Posts : 712
    Mentioned
    0 Post(s)

    Default 417 vs MR762 receiver pin holes?

    Can anyone confirm whether the receiver pin holes on the MR762 are in the same location as found on the 417? More importantly, are the receiver pins even the same size? It appears the MR762 has different receiver pins than the 417 and I'm curious if they are the same diameter pin size as the 417's?

    I understand the European MR308 has different receiver hole locations and from looking at photos, it appears the MR762 is the same as the 417.

    And before any of you say it (because I know some of you will ), I'm already well aware the 417 uppers are not available as was the case with the 416 uppers.

    Any info would be much appreciated. Thanks for the help guys.


    Tspeis
    Last edited by Tspeis; 12-30-2012 at 01:53 AM.

  2. #2
    HKPro Professional

    Join Date : Nov 2006
    Location : Pennsylvania
    Posts : 712
    Mentioned
    0 Post(s)

    Default

    Disregard gents, I was able to get an answer. For those who may have been wondering, the pin locations and sizes are the same between both guns.

    Thank you Montrala for the info.


    Tspeis

  3. #3
    Unrepentant HKHolic
    RegularGuy461969's Avatar
    Join Date : Mar 2015
    Location : By the Great Shell Bay
    Posts : 2,735
    Mentioned
    46 Post(s)

    Default

    I'm reviving this because I want to confirm that MR762 and MR308 uppers are interchangeable?

    Thanks for the help.

    David


    Sent from my iPhone using Tapatalk
    "Just because you're paranoid doesn’t mean they're not after you!"

  4. Remove Advertisements
    HKPro.com
    Advertisements
     

  5. #4
    HKPRO PREMIUM PARTNER
    dwillHK's Avatar
    Join Date : Mar 2006
    Location : South FL, USA
    Posts : 3,075
    Mentioned
    11 Post(s)

    Default

    Don't know about the euro-spec MR308, but on the US MR762, the rear takedown pin can be replaced with a standard AR pin, and the front pivot pin can be replaced with a HK417 pivot pin. I know this to be true as I've used them on my MR762 to get rid of those target pins that need a tool that comes standard on the gun.

  6. #5
    Unrepentant HKHolic
    RegularGuy461969's Avatar
    Join Date : Mar 2015
    Location : By the Great Shell Bay
    Posts : 2,735
    Mentioned
    46 Post(s)

    Default

    Quote Originally Posted by dwillHK View Post
    Don't know about the euro-spec MR308, but on the US MR762, the rear takedown pin can be replaced with a standard AR pin, and the front pivot pin can be replaced with a HK417 pivot pin. I know this to be true as I've used them on my MR762 to get rid of those target pins that need a tool that comes standard on the gun.
    Thanks, but I'm trying to figure out if the 308 and 762 uppers are compatable on each others' lower.

    I could have started a new thread but this one partially addressed my question, or at least appeared to. I'm trying not to start threads with questions that may already have been answered. This was the closest one in my search results.

    Maybe @Montrala or @G3Kurz or @Drooler or someone else might know.

    Thanks Again,



    Sent from my iPhone using Tapatalk

  7. #6
    Unrepentant HKHolic
    Montrala's Avatar
    Join Date : Nov 2003
    Location : Poland
    Age : 48
    Posts : 3,437
    Mentioned
    33 Post(s)

    Default

    I did not research deeply into that matter, but I have meeting with HK guys at IWA and will try to remember to ask them about that. But I have very poor memory :(
    Hidden Content Hidden Content
    Current: SFP9SD-SF, P2000SK, MR223A3 11.5"
    Past: P30L, P2000, P30, P7M13, Expert, G3 (MKE T41), HK45C, MR223 16.5"/14.5", SFP9-SF
    I'm sponsored competition shooter representing Heckler&Koch, Hornady, Khales & Typhoon Defence brands in Poland

  8. #7
    Unrepentant HKHolic
    RegularGuy461969's Avatar
    Join Date : Mar 2015
    Location : By the Great Shell Bay
    Posts : 2,735
    Mentioned
    46 Post(s)

    Default

    Quote Originally Posted by Montrala View Post
    I did not research deeply into that matter, but I have meeting with HK guys at IWA and will try to remember to ask them about that. But I have very poor memory :(
    That would be much appreciated.

    Thanks


    Sent from my iPhone using Tapatalk

Sponsored Links

 
 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

mr762

,
mr762 vs
,

receiver pin sleeve

Click on a term to search for related topics.