View Profile: 556x45mm - HKPRO Forums
Tab Content
No Recent Activity
About 556x45mm

Basic Information

About 556x45mm
Location:
Virginia

Signature


NRA Benefactor - Life Member

Statistics


Total Posts
Total Posts
61
Posts Per Day
0.05
General Information
Last Activity
12-26-2019 10:28 PM
Join Date
01-21-2017
Referrals
0
No results to display...
Page 1 of 2 1 2 LastLast

11-14-2018


11-13-2018


10-17-2018


07-12-2018


02-09-2018


12-31-2017


11-07-2017


09-17-2017


09-16-2017


09-13-2017


09-09-2017


09-02-2017


08-29-2017


08-28-2017


07-13-2017


06-19-2017



Page 1 of 2 1 2 LastLast

9 Likes

  1. MickeyD
    MickeyD liked post by 556x45mm On thread : Zenith Z-5P Break-in Re: issue found
    90986 First post, hope this helps someone. Here is a picture of the bolt head carrier from my Z5P, it clearly shows a machined ramp on the back face where it would contact the hammer.
    Liked On: 04-14-2020, 04:08 PM
  2. Blitzkrieg
    Blitzkrieg liked post by 556x45mm On thread : Quick note on Zenith customer service
    I also had a positive experience with Zenith Customer Service. One of the three mags supplied with my Z5P would not reliably feed, a quick call to customer Service and a new magazine was on the way....
    Liked On: 11-23-2018, 11:14 PM
  3. brewcruiser3
    brewcruiser3 liked post by 556x45mm On thread : Quick note on Zenith customer service
    I also had a positive experience with Zenith Customer Service. One of the three mags supplied with my Z5P would not reliably feed, a quick call to customer Service and a new magazine was on the way....
    Liked On: 11-21-2018, 11:15 PM
  4. Marine0303
    Marine0303 liked post by 556x45mm On thread : Quick note on Zenith customer service
    I also had a positive experience with Zenith Customer Service. One of the three mags supplied with my Z5P would not reliably feed, a quick call to customer Service and a new magazine was on the way....
    Liked On: 11-21-2018, 09:13 PM
  5. login_local
    login_local liked post by 556x45mm On thread : POF Collapsing stock fitment on Omega SD Receiver
    That one fit my OM-9 SD perfectly. Here is a pic of a TPM suppressor and OM-9 SD shroud fitment. 218870
    Liked On: 11-14-2018, 11:59 AM
  6. Marine0303
    Marine0303 liked post by 556x45mm On thread : Gunsmithing/Armorer 'Sticky' ????
    Allocating funds now, thanks James.
    Liked On: 10-17-2018, 01:06 AM
  7. Marine0303
    Marine0303 liked post by 556x45mm On thread : Check Out Garand Thumb's Z-5P Review
    Excellent video, thanks!
    Liked On: 10-17-2018, 12:51 AM
  8. Grubby669
    Grubby669 liked post by 556x45mm On thread : My PTR 9C review thread
    Thanks for the excellent review and write-up of your experience with the PTR-9C!
    Liked On: 07-04-2018, 10:20 PM
  9. dan1612
    dan1612 liked post by 556x45mm On thread : Sight chop. Too easy!!
    You are brave, but the end result looks great, good job.
    Liked On: 07-04-2018, 01:42 PM
iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
Submit Feedback For 556x45mm
View Complete Feedbacks for 556x45mm
  Past
Month
Past
6 Months
Past
12 Months
  0 0 0
  0 0 0
  0 0 0