HK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE
Results 1 to 6 of 6
Like Tree1Likes
  • 1 Post By LCSO264

Thread: HK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE

  1. #1
    HKPRO Professional
    LCSO264's Avatar
    Join Date : Feb 2005
    Location : Northwest
    Age : 45
    Posts : 3,831
    Mentioned
    15 Post(s)

    Default HK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE

    After my previous post:
    https://www.hkpro.com/forum/outside-...nance-apo.html

    I was contacted by the owner of Kaluban Cloak. He saw my home heat-gun and hack saw work on my original Kaluban Cloak holster, and he offered build a holster that met my needs with the attachments on my HK45C; TLR7 and my slide milled by APO for an RMR2. I prefer to carry my gun IWB at 3 o’clock. I also carry my spare mags (2 mags), handcuffs, and a , and a 20rnd riffle mag IWB. (Kaluban doesn’t/didn’t currently offer a handcuff case, I picked one up on Amazon and added Kaluban Cloak IWB snapping belt loops). I use KC’s snapping belt hoops to attach my IWB gear to my belt, the no longer in production HTC concealed carry pistol belt.

    While talking with the owner, a super friendly guy, I told him of my preference for all/most of my work EDC to be IWB, he mentioned a new pad he was mounting to his equipment. I wound up ordering a new dual mag holder and rifle mag holder with the backer pad. The holster for my rather unique handgun set up also had the padded backer.

    I attempted to send one of @mattfrey ‘s TLR7/8 HK45C locking pieces to him, but the post office chose to send it back to me for reasons only known to the USPS?

    In very short order, I received the new gear. I’ve been wearing it daily to work since early December. Again, the quality of Kaluban Cloak top shelf. I prefer KC over Raven and other kydex gear I’ve tried. I know some will question my decision to IWB everything but my flashlight (SureFire), but for my assignment and the gear I wear concealed, IWB suits me best. The retention and comfort of the holster and mag holders is great.

    the customer service with KC is of the best I’ve ever encountered.

    So, how I wear my gear. As mentioned my holster is at 3 o’clock, with my rifle magazine behind it. My flashlight is about 11 o’clock. My flashlight is on an OWB pouch made by www.snakeeaterractical.com. My spare handgun mags are at 9—10 o’clock, with my cuffs behind the handgun mag holder.

    I forgot to mention, the mold KC has for the HK45C with the TLR7/8, will also accommodate the newer models/switches (TLR7/8A).

    Here are some pics:
    HK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE-26539f8e-ab59-423e-bfa8-f0af64af6cda.jpegHK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE-57630f39-e59d-4240-b092-da0e21c71879.jpegHK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE-b5a9bf9b-f580-42c7-81f4-de9fa856253f.jpegHK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE-9637579a-f9b6-4f65-a56b-f9883e672b38.jpegHK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE-e5210565-a91d-4de7-af20-98212039d4fe.jpegHK45C, APO/Red Dot (RMR20), TLR7, and Kaluban Cloak holster. UPDATE-650062c0-30ea-43a9-9103-d3da0c8cd754.jpeg


    The spare handgun mags are full-size HK45 mags with the HKPARTS +3 extensions.
    I previously posted a review of my experiences with various HK45 mag extensions here:
    https://www.hkpro.com/forum/hk-handg...tml?highlight=
    Last edited by LCSO264; 02-04-2020 at 05:16 PM.
    sabre675 likes this.
    HK91
    HK94
    USC/UMP
    SL8/G36
    P7M8
    P9s .45acp
    VP70Z
    USP Tactical .45acp
    V51/HK51 clone
    HK45
    HK45c
    HK 416 10.5" upper
    GSG5PK
    P30Ls
    HK45T (OD Green)
    VP9
    CR556A1
    P30SKs
    SP5K

  2. #2
    Member

    Join Date : Feb 2016
    Posts : 81
    Mentioned
    0 Post(s)

    Default

    That's beautiful work. I've been considering something similar for mine. Where did you get the locking plate from? Do we just message that member?

  3. #3
    Very Senior Member

    Join Date : Jun 2008
    Posts : 219
    Mentioned
    9 Post(s)

    Default

    I'm honored to have been able to contribute to that sweet duty rig!

  4. Remove Advertisements
    HKPro.com
    Advertisements
     

  5. #4
    HKPRO Professional
    LCSO264's Avatar
    Join Date : Feb 2005
    Location : Northwest
    Age : 45
    Posts : 3,831
    Mentioned
    15 Post(s)

    Default

    Quote Originally Posted by DreadPirateMoyer View Post
    That's beautiful work. I've been considering something similar for mine. Where did you get the locking plate from? Do we just message that member?
    shoot a PM (or whatever) to @mattfrey he 3D prints a locking key that works with the HK45C rail/extended trigger guard.

    This older post has a better picture of my HK45C with the TLR7 mounted....
    https://www.hkpro.com/forum/saddlery...k-holster.html
    Last edited by LCSO264; 02-04-2020 at 05:29 PM.
    HK91
    HK94
    USC/UMP
    SL8/G36
    P7M8
    P9s .45acp
    VP70Z
    USP Tactical .45acp
    V51/HK51 clone
    HK45
    HK45c
    HK 416 10.5" upper
    GSG5PK
    P30Ls
    HK45T (OD Green)
    VP9
    CR556A1
    P30SKs
    SP5K

  6. #5
    Junior Member

    Join Date : Dec 2012
    Posts : 21
    Mentioned
    0 Post(s)

    Default

    Awesome setup. I wish I would have known about Kaluban.

    I was at my wits end finding holster makers who had the custom Matt Frey key, so I ended up buying a bunch of kydex to make one myself.

    Now i'm in a little too deep making holster for everything I own.

  7. #6
    HKPRO Professional
    LCSO264's Avatar
    Join Date : Feb 2005
    Location : Northwest
    Age : 45
    Posts : 3,831
    Mentioned
    15 Post(s)

    Default

    Quote Originally Posted by TheCafeRacer View Post
    Awesome setup. I wish I would have known about Kaluban.

    I was at my wits end finding holster makers who had the custom Matt Frey key, so I ended up buying a bunch of kydex to make one myself.

    Now i'm in a little too deep making holster for everything I own.
    I briefly flirted with what you’re doing, before I contacted KC. Good luck to you..
    HK91
    HK94
    USC/UMP
    SL8/G36
    P7M8
    P9s .45acp
    VP70Z
    USP Tactical .45acp
    V51/HK51 clone
    HK45
    HK45c
    HK 416 10.5" upper
    GSG5PK
    P30Ls
    HK45T (OD Green)
    VP9
    CR556A1
    P30SKs
    SP5K

Sponsored Links

 
 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •