HKPRO Forums banner

416

  1. HK PARTS AND ACCESSORIES FOR SALE
    Hello HK Pro! WTS a Knight’s Armament Mp5 RAS Rail Part #97198 I purchased this directly from a KAC dealer about 1.5 yrs ago. I installed this one time on an Sp5 and removed it so technically it’s used but like new condition. Factory cross bolt and locking nut included. Selling because I...
  2. HK CLONE TALK
    Question is brownells still making the BRN4 416 lowers on the website is says “ no longer deliverable from the factory “ I’m not sure if that means they will no longer be making them or not. Also there isn’t a restock notification option either.
  3. HK CLONE TALK
    I tried a search, but didn't find the answer to this. Does HK make the 416? (Fairly new to the Forum)
  4. HK416 and HK417 HQ
    I wonder if any modification is needed
  5. HK HEADS UP!
    As the title says, looks like a compleye 416 BCG. Ive seen a frw people posting looking fir these. no affiliation. Come Get It!!! https://www.gunbroker.com/item/882149846
  6. HK CLONE TALK
    Just picked up a BRN-4 lower from Brownells and plan to have it laser engraved to somewhat match HK's normal looks (shocker, I know). My question is, what's the difference between marking the lower as just a 416 v. a 416D, and which would be more applicable to my case? Assuming I proceed with...
  7. HK416 and HK417 HQ
    I bought a Brownell's BRN-4 and the 416 Upper. I sent them both off to San Antonio Laser Engraving today to get marked. My first question is - On the right side of the lower, how should I mark it? What's the difference? Is any more or less desirable? Heckler & Koch GmbH Made in Germany with...
  8. HK PARTS AND ACCESSORIES FOR SALE
    For sale is a HK 416 De-milled Parts Kit from previous Law Enforcement use. The condition of the bolt and barrel lining is very good. The exterior hand guard and etc has normal LE wear and tear. I originally received several of these kits and I was going to save this last cherry picked kit for...
  9. WANTED TO BUY HK PARTS AND ACCESSORIES
    Good evening gentleman, I am looking to purchase a TD415/416 upper, I am looking for specifically the 14.5 or 10.5 length upper however I am also open to the 16 as well. I am also looking for the 10.3 geissele rail in black also for another build that I am finishing up! Please let me know what...
  10. WANTED TO BUY HK PARTS AND ACCESSORIES
    Anyone have either of these for sale?
  11. HK416 and HK417 HQ
    I've searched a bunch and can't seem to find anyone who has posted the pictogram markings for Safe, Semi, FA for the 416 clone guys to engrave with. Any help here? Thank you!
  12. HK PARTS AND ACCESSORIES FOR SALE
    Hello All, For sale are HK 416 Parts Kits with date codes AH. These are Non-OTB and Non Vented Gas Block. They have PD wear and tear. I have included quite a few pictures, any additional photo requests please post in this thread and I will provide. PayPal +3%, PayPal F&F Discreet, Zelle, or...
  13. WANTED TO BUY HK PARTS AND ACCESSORIES
    Preferable low round count and no barrel staining. Also open to a Nefarious Arms barrel someone is looking to part with. Email for best comms.
  14. HK NFA TALK
    I've decided to form 1 my 416 (pistol, w/o brace) for SBR. What lengths are people getting success with approval, please? LGS doesn't have a brace on hand otherwise I'd go that route for measurements. Thanks.
  15. HK CLONE TALK
    Looking to likely form 1 my 416, but cannot get clear confirmation one way or another if it will work with LAW Tactical folding adapter. Response directly from LAW states they don't have one specific to the .22LR (which I assume is due to the bolt???) but it "might". I tried to look through...
  16. HK PARTS AND ACCESSORIES FOR SALE
    ALL SOLD I have for sale the following parts from a new BE 416 kit: - 416 stock (commercial-spec) - $140 SOLD - 416 quad rail - $180 SOLD And one lightly used item from the same kit (used for one range trip, 50 rounds): - 416 charging handle - $60 SOLD $10 for shipping. My prices are...
  17. HK PARTS AND ACCESSORIES FOR SALE
    I have for sale the following parts from a new BE 416 kit: - 416 stock (commercial-spec) - $̶1̶5̶0̶ $140 - 416 grip - $35 SOLD - 416 quad rail panels (set of 3): $30 SOLD $10 for shipping. My prices are totally firm. I can take PayPal (friends and family), Zelle, or any other common payment...
  18. HK PARTS AND ACCESSORIES FOR SALE
    Original HK MR556 upper sent off to IGF to reprofile to 416 specs, the work includes: Chop to 10.4" Turned down to thin profile barrel Removed MR556 tab from the extension Shaved sling loops from the gas block Nitride treat the barrel The safety lever was removed from the BCG so you can use...
  19. WANTED TO BUY HK PARTS AND ACCESSORIES
    As title says, condition doesn't matter too much just function. Message me if you have one you'd like to get rid of.
  20. HK REFERENCE LIBRARY
    How to guide for remarking an HK MR556 to 416 Gone are the days of asking for help and hearing “I have a guy. But I can't say…” I have created this guide in hopes of clearing the silence and confusion surrounding remarking an MR556 or MR762. Before I start, there are many ways to go about doing...
Top