HKPRO Forums banner
build
1-19 of 19 Results
  1. HK CLONE TALK
    Hello all- new poster, new builder, probably old questions. Currently planning a build out an mp5 from parts kit, but I'm not too sure of the rivets used in the magwell sling clip- the rivets on the mp5 magwell section I have seem to be 1/8" diameter uptop and squished on the inside, but the...
  2. HK CLONE TALK
    so new to this but reading into the psg rifle seeing how I could get my ptr to get more acc & reduce recoil. Has anyone welded the strengthening rails like the PSG1 has covering the rails for a collapsing stock onto a ptr? Been searching the site but no luck yet, figured I’d cast a line for some...
  3. WANTED TO BUY HK PARTS AND ACCESSORIES
    I've figured out what I'm going to do to get a lower made. Now all i need to do is find a HK Milspec parts kit. I figured I could just use a Colt part's kit with a milspec buffer tube if I couldn't find any, but wanted to hear what you guys have to offer. Any ideas?
  4. HK ROOKIE CORNER
    -->Calling all builders!<-- Some questions before starting my first clone project. So I'm almost ready to start my pistol clone build. I have done more reading on this than I did in college :100000: , but I still have some questions/ideas I wanted to throw out here before getting started...
  5. HK LONG GUN TALK
    I've lurked on this forum for years, rarely post. I'd appreciate your expertise and advice on this kit: https://www.apexgunparts.com/parts-kits/hk33-parts-kit-5-56-223-very-good.html I own this kit (or one exactly like it), and a receiver flat from HKparts. I've decided that I don't have the...
  6. HK PARTS AND ACCESSORIES FOR SALE
    The finest USA & German made parts for a complete parts kit for an MP5K, MP5K-N pistol build Each kits includes the following HK Parts: Barrel - 5.5" button rifled, 3-lugged & threaded 1/2 X 28 with thread protector fully finished in the ultra desirable "nitiride" process for long life &...
  7. HKParts.net
    Each MP5 9mm parts kit started life as an iconic German manufactured MP5 that was issued to the border guard and military police for service. During that service they were carried a ton but rarely fired. In order to import these rare and hard to find MP5 parts kits, the barrels had to be...
  8. HK CLONE TALK
    Hello I had been researching HK G-3 builds for about three years now. I purchased parts about a year ago. Tried to proceed, had issues and got discouraged. Now I am back at it and thoroughly discouraged. By the way I have completed a vz-58 build and five AK platform builds and pressed barrels...
  9. HK ROOKIE CORNER
    I am new to HK but have decided that my next addition to the safe has to be a MP5 clone. I would like the end result to be a MP5 SBR of very good quality but I am not sure how to get their. Maryland has laws about what make and model MP5 pistols you can even start with. Pretty much all MKE...
  10. HK CLONE TALK
    I'm new to this site, but not to the NFA world. I need help in picking out the right parts to build a proper MP5SD clone. I prefer parts that just "plug-in-play" but if I cannot get around that then I have gunsmiths around me that would be able to do it. I'm currently looking at the Omega SD...
  11. HK ROOKIE CORNER
    I'm new to this site, but not to the NFA world. I need help in picking out the right parts to build a proper MP5SD clone. I prefer parts that just "plug-in-play" but if I cannot get around that then I have gunsmiths around me that would be able to do it. I'm currently looking at the Omega SD...
  12. HK CLONE TALK
    Hey guys names Doc, I am thinking about getting my first rifle,the research Ive done I want to get a PTR 91 GI. I want to upgrade it as well. After looking at the upgrades I want it seems i should just build one instead of buying a stock model and buying the upgrades on top of it. when i say...
  13. HK CLONE TALK
    Anyone know what size tool is used to create the bevel on the cocking tube ring where the support detent latches? Like in this picture Thanks
  14. HK ROOKIE CORNER
    First post on the HK forum here. I bought a PTR-91 kit earlier this summer and I figured it might be cheaper to build it instead of buying it (probably a bit more fun too). I'll probably start in a few weeks here, brushing up on my MIG and TIG welding skills before I even think about touching my...
  15. HK CLONE TALK
    So, hi. First post here, I made an account just to ask this question. Sorry, I don't know how many times people have asked questions like this, so I apologize if this is an annoying subject, but I have to ask. Let me also preface this by saying, I know nothing about guns or gunsmithing. This is...
  16. HK NFA TALK
    Looking to see if someone could be able to build/clone a HK21 or 21e feed mech. Want to know price of cloning willing to pay good money depending if my project goes through... Also, looking for detailed blueprints of a 21e or 21 feed mech, will buy if have to. Thanks much in advance it's highly...
  17. HK NFA TALK
    Hey guys i'm looking for detailed blueprints/specs for a HK21 build, mainly the feed mech blueprints (those blueprints alone are fine too) if someone can point me in the right direction. It would be highly appreciated i've been searching for these awhile now and no luck. Please help me out here...
  18. HK CLONE TALK
    Out of the following two builders, who makes the Best Quality HK53 Clones? * Turner Fabrications - Mike T. * Dakota Tactial - Chopstix I am aware of the following builders, but only want to know about the two mentioned above. * Investment Grade Firearms (IGF) - Jason C. * Ghilliebear * RTDS *...
  19. HK NFA TALK
    I was just looking for a second opinion and to see if the information I have is correct or if I need to have something done to my weapon. The manufacturer of my MP5SD semi-auto (I believe it was an HK94 because it does have correct import markings and is HK origional), he says Quote: "I used win...
1-19 of 19 Results
Top