HKPRO Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 22 Results
  1. HK CLONE TALK
    ***Reveiw***Ok I just bought my new AP5 and have just got done shooting the H out of it. I bought 8 Different Brands to test of 9MM and shot clips of each. WOW this gun is amazing not one problem with a round 600 rounds not even, any at all none, I have never had a gun that liked all ammo...
  2. HK CLONE TALK
    Thought these photos would help someone if they were considering an upgrade on their AP5. In my opinion the MKE extractor is probably fine. The ejector warrants more consideration...
  3. HK CLONE TALK
    Time for another quality comparison post featuring Turk stuff and HK stuff. I have procured a recently manufactured 3 Point "MP5/HK" sling from MKE in black, and I'm comparing it to the slings typically gotten from HK (green). Gallery below, but the TL;Didn't tab through every pic is in the...
  4. HK CLONE TALK
    Hi all, relatively new to MP5 stuff. Long story short, few months ago I picked up an AP5, and now I want to swap trigger housings/group over to an ambi pictogram housing. I was curious however, will a 3/4 position selector meant for full auto packs work in a semi pack? Obviously provides no full...
  5. HK PARTS AND ACCESSORIES FOR SALE
    SPF CIMG For sale is an MP5 SEF navy-style complete trigger group, a finger groove SEF trigger housing, picatinny rail, slim handguard and Magpul selector. The trigger pack, picatinny rail, finger groove housing and handguard all came off an MKE pistol. The trigger pack has around 200 rounds on...
    $275 USD
  6. HK PISTOLS FOR SALE
    Unfortunately something came up and I have to offload my Zenith. It's been a reliable shooter for thr past 2 years, although I've only put about 300 rounds through it. The only issue I have is that the mags are a little loose, but the only time that has caused me any issue was with straight...
    $2,250 USD
  7. HK CLONE TALK
    Today was the day. I finally was able to take my newly acquired MP5K clone to the range. I had saved up some coin for several months to finally achieve my personal goal of owning an MP5. My initial impressions of the gun have been fantastic. The finish is very good, the tolerances seem perfect...
  8. HK CLONE TALK
    Finally willed myself to drop the money on an AP5-P. Im new to the MP5/Roller delayed blowback system as a whole. Upon first inspection, the fit and finish seems to be fantastic other than a small superficial chip in the paint just above the cocking lever. Very happy with the way it feels. I...
  9. WANTED TO BUY (WTB) HK FIREARMS
    I'm looking to buy a SP5k, AP5 and C93 pistol. New or used, but prefer used as I'll be shooting them. Please be able to accept credit card as payment. If you need references, just ask. I've bought and sold from several members on here.
  10. HK CLONE TALK
    Hello HK Fans, after a great shooing day with my MKE-T94 I wanted to clean it, and this part flew out. Unfortunately I have no idea what it is and where it belongs to. (I think it was laying loose in the trigger group and it dropped to the floor as I disassembled the gun) Any help would be...
  11. HK CLONE TALK
    Anyone have information on how may of the Zenith/MKE Z-43Ps were imported before they dried up. I know they are out there but I had never actually put eyes on one until today at my LGS. -E-
  12. HK NFA TALK
    Who is a suggested gunsmith that would be able to chop and thread the barrel of my MKE HK94 rifle? I need to submit my ATF forms and need the new barrel length and OaL measurements. I called S&H arms as they're local but Curtis said he doesn't work on clones.
    mke
  13. HK PISTOLS FOR SALE
    Selling my Z5RS. I think I've put about 600 rds or so through this gun so its still pretty dang new. Had a user induced malfunction on my first mag after I bought it. Since then it has run 100%. Works perfectly with all 3 MKE mags that come with it and with 5 POF mags I tried with it. Works with...
  14. HK CLONE TALK
    Hey there! I just entered the World of the MP5 type weapon by purchasing a BT96 (basically an MKE) MP5 clone. Unfortunately I was not too lucky with it. p.S. please excuse my English. It's not my native language. My Problem: I can tilt a locked-in-position magazine forward which then...
  15. HK CLONE TALK
    I've done some searching and eventually I'd like to go SBR, however back in 2012 I read that the MKE barrel was in demand for HK34's. Is there still a demand for 16" MKE barrels anymore? If so what are we talking in price? Depending on if I can sell my barrel will dictate how fast I send it...
  16. HK CLONE TALK
    Hey guys as some of you know I purchased what I thought was a brand new in box gun but apparently it had been previously shot from the dealer. I had Ghillie refinish my gun and I had to replace some parts in it so I am 922r compliant and now I'm looking to sell. Can anyone tell me fair prices...
  17. HK CLONE TALK
    Well all my life I've wanted an MP5 and had the opportunity to buy one at one time. However they are WAY out of my reach at this point. Back in 2011 I bought a very nice P7M8 from a guy from Houston and he mentioned that he was selling to buy an ATI MKE. I had no clue what that was and asked...
  18. HK NFA TALK
    I have a customer with approved form to make his MKE AT94 a SBR. I and another gunsmithing outfit were unable to push out the pin that holds the existing barrel in. The SBR barrel is a RCM inc tri-lug. Any suggestions of a place to send this off to get the barrel and pin pushed out and new SBR...
  19. HK CLONE TALK
    I took advantage of the recent discounted offer on MKE 94a2 rifles with plans to make it 922(r) compliant as a summer project. Given the number of places and resources, I thought it would be interesting and perhaps helpful to others preparing to do a similar conversion. I've worked on a...
1-19 of 22 Results
Top