HKPRO Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 29 Results
  1. HK LONG GUN TALK
    I run a lot of different rifle, pistol, subgun configurations so most of my kit has been set up and tested with that in mind. I’ve set up swappable Spiritus Systems plate carrier and micro rigs so I can swap pre laid out placards for MP5/AR15/AKMs within seconds based on my needs. For a...
  2. HK NFA TALK
    PTR91 ejector is jumping out of groove of bolt, thing runs fine in semi, but when I flip to full auto it fires a couple rounds then double feeds because the ejector is jumping out of that bolt groove. Is there a specific 308 ejector that works good with PTR91 Or should I get to welding. I...
  3. HK PARTS AND ACCESSORIES FOR SALE
    For sale (used): Haga Defense ACR adapter for the G3/HK 91 platform and accompanying Magpul ACR stock, complete with G3/HK 91 back plate and recoil rod assembly. The Haga Defense adapter is machined from aluminum and is affixed to HK back plate via two screws. The stock adapter utilizes a...
    $250 USD
  4. HK CLONE TALK
    Is the buffer upgrade worth it? I see they reduce the recoil by a good amount. I've heard that some people can't tell a difference. Can you just diy by switching the internals?
  5. HK CLONE TALK
    I Recently came across a JLD PTR 91 with a SN Starting with A1### with wide handguard date coded (1 IB) the handguard is Green with Bipod and wanted to know if anyone has any info on the date codes and SN. 1. Is the barrel a heavy barrel ? its the ban barrel with no muzzle brake. 2. Does it hv...
  6. HK CLONE TALK
    I have the Spuhr stock on my PTR and i want an HK 3 point sling. The Spuhr stock has the small hook hole like the front so I can add a sling hook the other end of the 3 point sling correct?
  7. HK CLONE TALK
    I kind of like them (ribbed). Have one on my PTR 32. Bought another black one, but for a PTR 91 GIR in green. I have no experience painting beyond shake cans. Any recommendations? I have a green one on order from RKS USA but I'll cancel that if I can turn this one green! Thanks I emailed RKS...
  8. HK PARTS AND ACCESSORIES FOR SALE
    Evening, Listing a few odds and ends that I have no use for anymore. Adding stuff as I find it. First "i'll take It" followed by a PM please. Can provide more pictures if needed PTR 91 FA Tungsten Bolt Carrier - 150$ shipped Condition: Used approx. 20 rounds AP5 Flash Hider. - 60$...
    $150 USD
  9. HK CLONE TALK
    Quick question- Picked up a PTR91 a few weeks back and I'm noticing wear where the cocking handle meets the receiver tube in the front, and just wanted to know if this kind of wear is normal or not. This is my first roller gun so I figured I would come to the experts about this before...
  10. HK CLONE TALK
    so new to this but reading into the psg rifle seeing how I could get my ptr to get more acc & reduce recoil. Has anyone welded the strengthening rails like the PSG1 has covering the rails for a collapsing stock onto a ptr? Been searching the site but no luck yet, figured I’d cast a line for some...
  11. HK CLONE TALK
    I'm on my third, yes third ptr 91 bolt head!!! The original that came with the rifle when new, was replaced along with the barrel and cocking tube when the brand new gun totally locked up on me after just 160 shots. It was sent back for warranty work. Bolt head #2 that came with the rifle after...
  12. WANTED TO BUY (WTB) HK FIREARMS
    Looking for: 32P and 32 KFR in Gen 2's Ideally a 91-A3R but will consider other configurations. C93's Always open to hear about other items.
  13. HK CLONE TALK
    Hey, all! I'm new here, although I've lurked for a few years. I recently picked up this match trigger pack from HKParts.net. Upon getting the new pack, I oiled her up and stuck it in the stock polymer PTR-91 trigger housing that came with the rifle. It was a noticeable improvement over the...
  14. HK CLONE TALK
    We have been testing the new PTR 9CT pistols in semi and full auto . Installed a NFA Sear pack and running Wolf steel cased ammo and thus far they are running like a champ. The PTR 9 series of pistols comes with a factory installed Full auto bolt thus making an ideal set up for NFA Sear pack...
  15. Atlantic Firearms
    PTR 91 released their PTR 9 mm Roller lock operating system pistol series. The PTR 9CT sports a Nitride treated 8.86" barrel with a 3 Lug & 1/2 x 28 threads for mounting muzzle devices or suppressors . Each pistol is built with a full auto bolt carrier and ready to be used with your NFA Auto...
  16. HK CLONE TALK
    Hi all ill get right to the point, so i remember in my hours of reading about ptrs somthing came up with certain issues with certain serial numbers. I was hoping someone could post those findings here so i can check my serial number. Also i have to sight this thing which i never have done...
  17. HK CLONE TALK
    SO I Just got my PTR 91, dont know what sling to get. What do you guys suggest? post links here and any reviews and opinions?
  18. HK CLONE TALK
    Hey guys, I am pretty new to the HK game, particularly with rifles. Recently bought a PTR-91FR for the deal of a lifetime, and all was well in the world until I took it to the range. Was accurate, soft shooting, all the good stuff, but it had some WEIRD cycling issues, and I wanted to get...
  19. HK CLONE TALK
    I have recently purchased a surplus Hensoldt Fero Z24 (used condition) from a recent trip to Germany. I was aware of potential mounting issues with the Z24 and PTR 91 F (AW later model, built in 2014), primarily with the bumper on the claw mount interfering the with rear sight. I removed this...
  20. HK CLONE TALK
    Hey Everyone, New guy here. So I've been shopping around for a .308 battle rifle as an all purpose/shtf weapon for a little while now. I just stumbled across the PTR's the other day and these look like the most promising combo of reliability, accuracy, and price. The best looking one to me...
1-20 of 29 Results
Top