HKPRO Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter #1
Guys,

A few years ago I bought a like new police trade in full size 9mm USP w/ LEM trigger for about $375. Its case had a piece of masking tape on it marked "spare"; so I think I did okay in the price department. ;) I also have a USP 45 Expert and really like the trigger, so I'm thinking about buying a match trigger for the 9mm.

I was looking at a picture of the kit online and there doesn't seem to be a whole lot to it. Do I need the hammer from the kit or would I still use the bobtail version that originally came with the gun? If the new hammer isn't used the match conversion kit looks like about $10 worth of small parts, so before I order the match kit I thought I would ask for some input/suggestions on here.

Thanks.
 

·
Registered
Joined
·
1,964 Posts
Guys,

A few years ago I bought a like new police trade in full size 9mm USP w/ LEM trigger for about $375. Its case had a piece of masking tape on it marked "spare"; so I think I did okay in the price department. ;) I also have a USP 45 Expert and really like the trigger, so I'm thinking about buying a match trigger for the 9mm.

I was looking at a picture of the kit online and there doesn't seem to be a whole lot to it. Do I need the hammer from the kit or would I still use the bobtail version that originally came with the gun? If the new hammer isn't used the match conversion kit looks like about $10 worth of small parts, so before I order the match kit I thought I would ask for some input/suggestions on here.

Thanks.
For the match/LEM hybrid trigger you'll keep the two piece hammer which is the cornerstone of the LEM system. I'd suggest calling HK and telling Travis what you've got and what you're doing and just ordering the parts you need rather than the whole match kit.
 

·
Registered
Joined
·
1,964 Posts
See my reply in this thread. Get only the needed parts for the Match Trigger instead of the whole kit and you'll save about $80. The only problem is that 2 of these parts are not in stock at the moment. I checked TGS and HKParts this morning.

Update: Found a source for the out-of-stock Match Hammer Spring and Flat Nickel Spring. They're in stock now.
I'm glad you found them but have a question. You said you tried TGS and HKParts but did you try HK?
 

·
Registered
Joined
·
74 Posts
Discussion Starter #6
Thanks guys, this was exactly the information I was looking for.... Im going to order the parts now.
 

·
Registered
Joined
·
18,641 Posts
Thanks guys, this was exactly the information I was looking for.... Im going to order the parts now.
Take Brownie's advice and call HK Cust Service and see if you can order the parts directly from them. If not, then try the other places in my links.
 
1 - 7 of 7 Posts
Top