[xfilterx]

I'm not sure about the TN shroud. This is pretty snug. Putting this on a Top Notch 9mm barrel... it gets tight quick. So I lubed up the barrel before installing the fake suppressor. I really don't care about the barrel. But I wanted it to slide on. And that it did. I can grab the weapon by the barrel shroud...and not worry about it coming off.

Awesome! There's no way I could grab the TN shroud to lift up the gun, the shroud would slide right off. I'll give the shroud a shot and worse case scenario, I'll put it on my USC. Thanks!

 

[GEBEBPRS]

trust me they are sweet.... Wait another bolt...for sale... dooh

 

[SuicideHz]

So how much are the TN barrels? I'd just have one made "right" the first time and have it cut down and "lugged" all at the same time...

 

[GEBEBPRS]

go to hkparts.net.. I think $295 or $250??? Last time I checked,,they didn't have any...
Glenn

 

[HKNC]

Very nice. I like the way the 3-lug turned out for you. I am working on my own UCS/UMP conversion as well. Thanks, for sharing the pics. Anyone else have a USC/UMP 9mm with pics they want to share?

Love it

 

[GEBEBPRS]

..I have the Jame Bond 9mm UMP Class 1 But I'm also working on 2 more... I can't use the word LOVE anymore....it's beyond that now..

 

[JCook]

Call Top Notch and order one of the 16" 9mm barrels. When you get it, send it to Mark McWillis for the chop, polish and 3-lug work.

Gordon Miller is advertising UMP 9mm bolts on Sturm now, but they are higher-priced than Adam was selling them for.

Thanks,
James

 

[One Man]

Guys, Do you have any idea if the Gemtech UMP 40/45 Surpressor will fit the 9mm UMP barrel? I know that one of the reasons Gemtech made the UMP supressor both for 40 and 45 is that it was a liability to make one for each...if you know what I mean. I'm just wondering if the flang on the supressor would be to large to fit on the 9mm barrel without a lot of undesirable "play".

 

[GEBEBPRS]

I just purchased a 45 GEMTECH UMP SUPPRESSOR. I tested my HK FACTORY 9mm barrel on their 45 UMP suppressor. LIKE A GLOVE!!!
go here..
http://hkpro.com/forum/showthread.php?t=97467

Trust me as soon as my dealer gets the suppressor and as soon we do the transfer I will video the suppressor in action....

So in closing IT FITS!!!! (The 45 UMP GEMTECH suppressor) will fit on a 9mm UMP barrel. The one at the show did...I assume they all do...

 

[JCook]

I have always assumed that the suppressor would not fit since the 40/45 B&T flash-hider won't fit. I guess I'll have to find a UMP suppressor and see if I get the same result as GEBEBPRS.

Thanks,
James

 

[One Man]

Thanks for the heads up man!! I've really been wanting to know about this for some time.

 

[bigdick]

http://www.brasscatchers.com/ Designed to fit the HK 45 USC barrel. The top notch 9mm is less than .010 different than the HK 45 barrel. Fits like a freaking glove. Put a thin coat of oil on the barrel first.

do these mess up the finish on the barrel ? how heavy are they ?

 

[GEBEBPRS]

I used oil and white lube... to install.. Don't know...
I was careful....

 

[freddy979]

Does the brasscatchers.com barrel shroud attach with set screws?

 

[One Man]

Well....I'm on the fence and here's the issue...

I have the option to buy the Gemtech 40/45 suppressor for my 9mm UMP from a dealer here locally....but I'm worried that I'll be disappointed with the ability of this suppressor to quiet the UMP sufficiently. I don't understand the architecture behind the construction of a suppressor very well but I assume the .45 opening at the end will allow a fair amount of flame, sound, and/or pressure to bypass the damping material essentially negating the use of the suppressor anyway.

What do you sages of suppressors have to say with regard to the use of a .45 suppressor (primarily the Gemtech in question) being used on a 9mm firearm?? My beloved UMP9…

 

[nerd0606]

Well....I'm on the fence and here's the issue...

I have the option to buy the Gemtech 40/45 suppressor for my 9mm UMP from a dealer here locally....but I'm worried that I'll be disappointed with the ability of this suppressor to quiet the UMP sufficiently. I don't understand the architecture behind the construction of a suppressor very well but I assume the .45 opening at the end will allow a fair amount of flame, sound, and/or pressure to bypass the damping material essentially negating the use of the suppressor anyway.

What do you sages of suppressors have to say with regard to the use of a .45 suppressor (primarily the Gemtech in question) being used on a 9mm firearm?? My beloved UMP9…

You should trade me your ump9 parts for my ump45 parts and it will suite your needs.:43:

 

[GEBEBPRS]

9MM UMP RULES AND KNOWS ALL
.....DONT TRADE!!!!!!!!!
good luck hunting though :17:

 

[deuc224]

I second that motion!!!!:83:

 

[nerd0606]

9MM UMP RULES AND KNOWS ALL
.....DONT TRADE!!!!!!!!!
good luck hunting though :17:

Thanks for the help!

 

[deuc224]

ill keep my eyes open, but to be honest, you should just keep your eyes on sturm 24/7.