HKPRO Forums banner

3461 - 3480 of 3527 Posts

·
Registered
C93, PTR 9CT
Joined
·
81 Posts
My new (Nov/22/2020mfg)
280820

PTR9-CT Nakatomi Plaza Christmas Party Gift! Magpul sling and QD's with a Strike Ind. "Link" angled QD mount on the rear of the forearm. BCM M-Lok slot covers and a Sig mfg. hand stop. Clipped n pinned SEF housing borrowed from another project. (hate skinnyass original Navy grip) HS530CU "doughnut of death" Holosun on a QD mount. ATI mags and Condor mag pouches and Lucas Extreme Duty gun oil. The Winchester steel case choked every 5-6 rnds but the brass case 119gr ran just fine through all mags.(60rnds per mag). The steel case ammo does choke in everything I own so I use it for training. I did debur the ejector and the ejector slot on the bolt when I got the weapon and tore it down for initial cleaning and inspection. Not a fan of the ejector riding off to one side of the slot instead of right down the middle.(might try to bend or just replace with HK mfg one. All in all?? Yippee-ki-yay!!
 

·
Registered
Joined
·
225 Posts
Got a few all with BRN4 lowers. Old style 416 is AF upper, Geisselle 10.4 is AK upper, 14.5 is all 416 upper with Nefarious Arms barrel, I do have the spare AH 10.4 barrel if ever needed, M27 clone with all 416 parts minus Nefarious Arms barrel, RDTS MP5F and Dakota Tactical D54N SBR.

I will say the Nefarious Arms barrels are tackdrivers. Both are sub MOA at 100 with 77's and sub MOA to 600 and even further. One likes 77 SMK and the other loves Lapua 77 Scenars. Still need a NF for the M27 clone.

281701
 

·
Premium Member
Joined
·
2,165 Posts
  • Like
Reactions: Tangotag

·
Registered
HK416C, HK416D CAG, HK MR556, HK UMP, HK USP9c, HK USP45T
Joined
·
81 Posts
That is an awesome gun. Can you share your specs? Using all HK Parts? Just need the Eyelets for the lower receiver. View attachment 280207
Sorry for late response. I need to figure out how to turn on my notifications so that I know when someone ask me a question. I will upload my build sheet with cost and sources on Monday.
 

·
Registered
HK416C, HK416D CAG, HK MR556, HK UMP, HK USP9c, HK USP45T
Joined
·
81 Posts
HK416c (PDW) with Build List and cost



Dans HK416C Build1.jpg


282601


HK 416c
SourceDescription Cost
BrownellsBRN-416 Lower Receiver $ 199.00
BrownellsBRN-416 Upper Receiver $ 159.00
HK Haus416 Piston Guide/Bushing $ 22.00
HK Parts8" Barrel Conversion kit w/ rail $ 995.00* 9" is correct but was not in stock
HK PartsPDW Retractible Stock kit $ 299.99
HK PartsTitanium Firing Pin $ 49.95* Did not pass though the 416C BC so I had to modify it
HK PartsFiring Pin retaining Pin $ 19.95
HK PartsFiring Pin Spring $ 19.95
HK HausBuffer Retainer Post $ - * The "C" does not use the post due to the "C" BCG
HK PartsBufffer Retainer Pin $ 3.95
HK PartsBolt Carrier Cam Pin $ 32.00
Arms UnlimitedHK416 PDW Bolt Carrier Assembly $ 439.00
BrownellsHK416 Bolt Assembly $ 209.00
HK PartsLow pro Vertical Grip $ 24.95
HK HausHK Ejection Port cover $ 42.00
Arms UnlimitedHK 30rd Magazine $ 45.00
RK USABattle Grip w/ Storage $ 60.00
Wilson CombatLower Parts Kit (less Trriger) $ 49.00
Wilson CombatUpper Parts Kit $ 49.00
Wilsom Combat Mil-Spec Trigger $ 65.00
Optics PlanetGeissele Super Charging Handle $ 100.00
San Antonio Laser EngrUpper/Lower Laser engraving $ 200.00
$ -
Subtotal $ 3,083.74
Tax $ 185.02
Total $ 3,268.76
 

Attachments

·
Registered
HK416C, HK416D CAG, HK MR556, HK UMP, HK USP9c, HK USP45T
Joined
·
81 Posts
HK416c (PDW) with Build List and cost



View attachment 282600

View attachment 282601

HK 416c
SourceDescriptionCost
BrownellsBRN-416 Lower Receiver$ 199.00
BrownellsBRN-416 Upper Receiver$ 159.00
HK Haus416 Piston Guide/Bushing$ 22.00
HK Parts8" Barrel Conversion kit w/ rail$ 995.00* 9" is correct but was not in stock
HK PartsPDW Retractible Stock kit$ 299.99
HK PartsTitanium Firing Pin$ 49.95* Did not pass though the 416C BC so I had to modify it
HK PartsFiring Pin retaining Pin$ 19.95
HK PartsFiring Pin Spring$ 19.95
HK HausBuffer Retainer Post$ - * The "C" does not use the post due to the "C" BCG
HK PartsBufffer Retainer Pin$ 3.95
HK PartsBolt Carrier Cam Pin$ 32.00
Arms UnlimitedHK416 PDW Bolt Carrier Assembly$ 439.00
BrownellsHK416 Bolt Assembly$ 209.00
HK PartsLow pro Vertical Grip$ 24.95
HK HausHK Ejection Port cover$ 42.00
Arms UnlimitedHK 30rd Magazine$ 45.00
RK USABattle Grip w/ Storage$ 60.00
Wilson CombatLower Parts Kit (less Trriger)$ 49.00
Wilson CombatUpper Parts Kit$ 49.00
Wilsom CombatMil-Spec Trigger$ 65.00
Optics PlanetGeissele Super Charging Handle$ 100.00
San Antonio Laser EngrUpper/Lower Laser engraving$ 200.00
$ -
Subtotal$ 3,083.74
Tax$ 185.02
Total$ 3,268.76
Correction the 416C bolt carrier came from Gatewood Supply not arms unlimited
 

·
Registered
Joined
·
42 Posts
PTR 9CT

Went back to PTR before a round was ever put through it, as tje only mags that would lock in place were the awful CTS ones included. Since then, running like a top with KCI G2’s.

I cheaped out on the light, but it feels good on that handguard with a chunk of Arisaka low profile rail. The MRO was an old one that’s been sitting in the safe for a couple years. But it’s a start. Smacks 6” plates at 50y, and silhouettes at 100. That’s about what I’d hoped for, so it’ll do for now.

Oh, yeah, four months in, and waiting for the second stamp to clear. We’ll see what happens, though. Interesting times, and all.

284034
 
3461 - 3480 of 3527 Posts
Top