HKPRO Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
612 Posts
Discussion Starter #1 (Edited)
I've had this bobcat for quite a while, I saw what I assumed was a scratch in the finish, but upon further inspection, it appears that it is in fact a crack.

It hasn't moved thru 1000's of rounds, with and without the can, some auto some not.

Any idea who can fix this, or of its fixable?

The offending crack, just below and in front of the ejection port.......
 

·
Premium Member
Joined
·
2,520 Posts
Looks like a scratch to me.
 

·
Registered
Joined
·
1,181 Posts
Either way your looking at a touch up or refinish,.....I would sand the area down to bare metal for further examination.
Hope its just a battle scar,...good luck!
 

·
Premium Member
Joined
·
8,625 Posts
That's super easy to fix for someone with a tig welder - just clear the paint off, and trace over it with a tig torch. Then spot refinish it.

But are you sure it's a crack? Can you feel it on the inside? It sure does look like just a scratch.
 
1 - 7 of 7 Posts
Top