HKPRO Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
893 Posts
Discussion Starter #1
FYI
The HK G3 .22 LR conversion kits will not work with these.
The lower tab on the bolt that guides it into the bolt carrier hit that big chunk of aluminum in the rear push pin area, the 22 bolt assembly won't even go into the receiver.
Just an FYI.
 

·
Registered
Joined
·
893 Posts
Discussion Starter #3
The rear section of the receiver where the stock push pins go through is a solid piece of aluminum. You could mill out (or even do it with a dremel if you were patient enough) a portion of the receiver to make it fit in if you really wanted to.
I wouldn't modify the 22 kit, because you'd have to take enough of those tabs off that I'd worry about it working right. They are obvously there for a reason.
Also, with the going price of one of these kits, the kit is probably worth more than the rifle.

I'll post a pic tonight.
 
1 - 3 of 3 Posts
Top