HKPRO Forums banner
Cancel
Create thread New Forums

G3/MP5 Aimpoint mount offer

Jump to Latest
21 - 40 of 56 Posts
#22 ·
I would love to buy two of them. But would you know if these mounts would be able to fit more than aimpoint red dots? I like having options of mounting more than one red dot from different companies.


Sent from my iPad using Tapatalk
 
#23 ·
Nick337 said:
I would love to buy two of them. But would you know if these mounts would be able to fit more than aimpoint red dots? I like having options of mounting more than one red dot from different companies.


Sent from my iPad using Tapatalk
Click to expand...
Have not tried other RDS. Holosun and other companies make RDS with the Micro footprint so I’m guessing they would work too but cannot confirm. Not sure about the mounting screw sizes are different too
 
Discussion starter · #24 ·
Nick337 said:
I would love to buy two of them. But would you know if these mounts would be able to fit more than aimpoint red dots? I like having options of mounting more than one red dot from different companies.


Sent from my iPad using Tapatalk
Click to expand...
I can confirm that they will fit most other red dots that use the Aimpoint footprint, such as Vortex Crossfire, various Holosun models etc. I personally use a Holosun HS503G-U as I prefer the Eotech style reticle over a plain dot.
So far the only model we've found that does not fit is the Aimpoint CompM5S and this is due to the offset battery compartment which hangs below the mounting surface and interferes with the mount.
 
#26 ·
waylon43 said:
The new Steiner MPS has the same footprint as the ARCO
Click to expand...
Indeed it does, decided to give a shot while awaiting for the ACRO P2 to be stocked/sourced. So far liking the Steiner setup and seems pretty comparable to the Acro…….Also keeps the same compact footprint (and absolute co-witness). **Of note the Infitech low profile rounded mount tabs (specifically left front) allows for just enough clearance (minimizing less thumb gouging guessing due to low rounded mount claws) and retains just enough room for slapping bolt fwd if so desired without interference (granted YMMV as I have average size thumbs)

Image
 
#27 · (Edited)
TX-HK said:
Indeed it does, decided to give a shot while awaiting for the ACRO P2 to be stocked/sourced. So far liking the Steiner setup and seems pretty comparable to the Acro…….Also keeps the same compact footprint (and absolute co-witness). **Of note the Infitech low profile rounded mount tabs (specifically left front) allows for just enough clearance (minimizing less thumb gouging guessing due to low rounded mount claws) and retains just enough room for slapping bolt fwd if so desired without interference (granted YMMV as I have average size thumbs)

View attachment 313352
Click to expand...
hopefully mine will be here any day, ordered my ARCO Black Friday weekend , was told next week hopefully for delivery, looks great and its easier on the pocketbook than the Aimpoint, as long as the quality is there, the other Steiner stuff I have seams quality
 
#28 ·
TX-HK said:
Indeed it does, decided to give a shot while awaiting for the ACRO P2 to be stocked/sourced. So far liking the Steiner setup and seems pretty comparable to the Acro…….Also keeps the same compact footprint (and absolute co-witness). **Of note the Infitech low profile rounded mount tabs (specifically left front) allows for just enough clearance (minimizing less thumb gouging guessing due to low rounded mount claws) and retains just enough room for slapping bolt fwd if so desired without interference (granted YMMV as I have average size thumbs)

View attachment 313352
Click to expand...
That looks nice! I have one extra ACRO mount and a couple of the micro mounts if anyone needs one.
 
#29 · (Edited)
I just stumbled over this thread last saturday.

As I am waiting for my 10266 for almost 8 months now I immediately ordered one for a Micro Aimpoint and for good measure added another mount for the ACRO to my order as well, as I am (desperately) waiting for the release of the SP5K-PDW here in Germany. As one of the OR pistols will get upgraded to a C-2 I guess I now know where that spare C-1 will go, after all.

Well, ordered on the weekend, I recieved an email on monday confirming the order and today the shipment already arrived! That's about a thousand miles in two days - amazing! And even the discount mentioned above was still honored.

Mounted a Micro H-2 to my SP5, fit and finish are amazing and I love the design. The rounded edges are a very nice feature, specially in comparison to the 10266.

The mount offers full cowitness and the sight is directly mounted, which allows the low line of sight.
That means that you can't quick-detach the sight and you will have to mount the gun similar as if using the iron sights.
If the intended use fits those parameter (it does fit mine), I think this is one of or the best mounting option(s) that I am aware of.

(y)

P.S.: Going to the range on the weekend, will try to get some pictures with decent lighting there.
 
#33 ·
I'd like to order but your website looks like there on backorder. I signed up for email once back in stock. Any ETA?
Thanks
 
Save
Reply Quote Like Like
#37 ·
TX-HK said:
Indeed it does, decided to give a shot while awaiting for the ACRO P2 to be stocked/sourced. So far liking the Steiner setup and seems pretty comparable to the Acro…….Also keeps the same compact footprint (and absolute co-witness). **Of note the Infitech low profile rounded mount tabs (specifically left front) allows for just enough clearance (minimizing less thumb gouging guessing due to low rounded mount claws) and retains just enough room for slapping bolt fwd if so desired without interference (granted YMMV as I have average size thumbs)

View attachment 313352
Click to expand...
Love that set up. Did you ever gouge your Hand or accidentally hit the optic? Or was that completely eliminated with this mount. Thank you!
 
21 - 40 of 56 Posts
About this Discussion
55 Replies
20 Participants
Last post:
slapshot
HKPRO Forums
posts
2M
members
97K
Since
2000
Actually created in 1999 (the original posts from the first database were lost), we are a forum dedicated to and laser-focused on Heckler & Koch firearms, Heckler & Koch accessories and the owners and enthusiasts that love them! Come join the discussion regarding HK pistols, long arms, NFA arms, HK accessories, HK history and trivia and more.
Full Forum Listing
Explore Our Forums
HK HANDGUN TALK HK CLONE TALK HK LONG GUN TALK HK NFA TALK HK TALK