HKPRO Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,023 Posts
Well, the G3SG1 stock just has a cheek riser on it.

If your comfertable with how your cheek sits with the riser, and your fine with the LOP on the stock then it should be fine.


The MSG-90 stock has an adjustable cheek piece, and Length of Pull on the stock, so its far more adjustable, for different optics you'de put on the rifle.
 

·
Premium Member
Joined
·
2,840 Posts
the MSG90 A2 has the rubber(like HK21) butt piece, the other does not, it plastic.

A2
http://www.hkspecialist.net/images/stock14.jpg
http://www.hkspecialist.net/images/stock15.jpg

MSG90

http://www.hkspecialist.net/images/stock6.jpg

both(SG1, MSG90) use a heavy or MSG90 buffer, so less felt recoil

neither will allow you do use the iron sights, the cheek pieces of both will not go down far enough, you can remove both if you wanted.

SG1 is about 3/4" longer than normal A2 stock. SG1 is MUCH harder to find them MSG90

up to you, but I would prolly go with the SG1 stock, if you dont like it, easy to sell and go MSG90.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top