[ctyatty]

do you mean like this?

 

[madduc]

Ctyatty - thanks for the reply but I need an attachment adaptor for a single point sling for this - see pic. It is for the rear.

 

[Jch1511]

You can get a replacement end plate with a QD or sling mount on it. Be careful not to strip the end cap bolt, it’s tight.

 

[madduc]

You can get a replacement end plate with a QD or sling mount on it. Be careful not to strip the end cap bolt, it’s tight.

View attachment 299910
View attachment 299911

Thanks Jch1511. Just what I need. I am in a bit of trouble though with that end cap bolt. Any hints on removing it? I stripped the head. Is it held in with locktite? Thanks again for the leads on the end plates.

 

[Jch1511]

At this point, use a quality socket bit, it offers more tooth than a Allen wrench, to remove the bolt and get a replacement bolt afterwards.

 

[madduc]

At this point, use a quality socket bit, it offers more tooth than a Allen wrench, to remove the bolt and get a replacement bolt afterwards.

Thanks Jch1511. The socket bit did the trick.