HKPRO Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter #1
Just curious how you fellas are cleaning your HK 91's? Kinda hard to get deep into the chamber/flutes etc. Is there somewhere on the site that details how one goes about this correctly? Thanks in advance fellas.
 

·
Registered
Joined
·
101 Posts
I start with the chamber face brush knock all the crud loose then hit the flutes with a chamber flute brush to get them clean. Then I bore snake the barrel and wipe out the receiver with paper towels.
 

·
Registered
Joined
·
217 Posts
I wet barrel chamber and breech face with Hoppes for 15 mins or so then I clean the chamber with a chambermaid brush tool from midwayusa. I haven't needed a breech face brush as mine comes clean with a rag on my finger reaching thru the mag well. I don't disassemble the bolt each time as it doesn't seem to get so dirty inside. I just wipe the outside clean and re-oil.
 
1 - 4 of 4 Posts
Top