HKPRO Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter · #1 ·
Is it possible?
 

·
Registered
Joined
·
2,783 Posts
Not without a lot of work and ordering a lot of specialized parts. Short answer is it cannot be done in a practical easy way and HK will not do it. Better to sell it and buy the gun you want and let the chips fall where they may.
 

·
Registered
Joined
·
3,466 Posts
Exactly 3 specialized parts are needed to convert V3 to so called "V0 LEM" (configuration originally used for P2000 nad P2000SK in Europe).

V0 is basically 5lb LEM with de-cocker button (enables to go from LEM pull to DA pull) and spurred hammer (enables to cock trigger action back from DA mode to LEM mode).

If you want to have US style LEM you will need 4 parts, and will have same (1-2mm) gap bettween frame and hammer on left side.

If you would do some search on my posts, you will find procedure how to convert V3 into LEM. Don't have time to put it here all over again.

BTW will void warrandy, I suppose, but is undo-able without trace ;)
 

·
Registered
Joined
·
381 Posts
I dont believe they would. I know some people have done it. If your going to do that you might as well get a Variant 3 in my opinion.
 
1 - 5 of 5 Posts
Top