HKPRO Forums banner

HK VP9/SFP9 trigger error - question

2377 Views 14 Replies 10 Participants Last post by  Klaustrophobia
I have a SFP9. I live in Norway som pardon any language errors.


When I fire my SFP9, especially on the first shot, it has a tendecy not to fire. The trigger feels like it is not in contact or slipping under on the trigger group. At other occations it feels like the trigger is releasing in two stages. Red red loaded chamber indicator is visible at the end of the indicator hole, then on the first trigger pull it goes halfway inside the channel, and on the second pull it has a fullrelease.

I have tried to recreate what is happening in these videos.

[[video][email protected]/28763495190/in/dateposted-public/[/video]

[video][email protected]/28763495190/in/dateposted-public/[/video]

If any of you guys have a idea of what it might be, please give me a advise.

1 - 1 of 1 Posts

· Registered
8 Posts
That looks like a problem with the firing pin safety. On the first pull the trigger bar fails to disengage the fp safety, but releases the striker and on the second pull it disengages the safety.

But like others said, you should get it checked by a competent armorer. I doubt there's not much you can do by yourself.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.