HKPRO Forums banner

HK VP9/SFP9 trigger error - question

2376 Views 14 Replies 10 Participants Last post by  Klaustrophobia
I have a SFP9. I live in Norway som pardon any language errors.

Problem:

When I fire my SFP9, especially on the first shot, it has a tendecy not to fire. The trigger feels like it is not in contact or slipping under on the trigger group. At other occations it feels like the trigger is releasing in two stages. Red red loaded chamber indicator is visible at the end of the indicator hole, then on the first trigger pull it goes halfway inside the channel, and on the second pull it has a fullrelease.

I have tried to recreate what is happening in these videos.

[[video]https://www.flickr.com/photos/[email protected]/28763495190/in/dateposted-public/[/video]

[video]https://www.flickr.com/photos/[email protected]/28763495190/in/dateposted-public/[/video]

If any of you guys have a idea of what it might be, please give me a advise.

Tegums
1 - 1 of 1 Posts

· Registered
Joined
·
23 Posts
Can't really tell by the picture, but I think the trigger bar spring took a crap. It might not be pushing up on the trigger bar, therefore the bar isn't releasing the safety(causing no fire). Also, that's probably why it goes under the sear lever instead of contacting it correctly.

But.....I could be wrong haha
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top