HKPRO Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
430 Posts
Discussion Starter · #1 · (Edited)
Hi everyone, I finally got the HK13K (BPP) running great with the sear but the C-Mag has issues. Every round that is fed from the right side hit the top of the barrel.
The rounds look like this

Ammunition Bullet Brass Pen Gun accessory

Pen Metal Brass Tool accessory Office supplies
Cylinder Core drill Tool accessory Tool Brass
Cylinder Metal Ammunition


How can i lower the angle the round gets fed?

Anyone an idea what i can do?
Thanks

George

PS. Dunno why the pic is not showing. Click on it and it will show.
 

·
Premium Member
Joined
·
472 Posts
I've had this happen on 9mm, when I blocked a 30 rd mag to 10rds for commiefornia. The cause was the spring doesn't slide smoothly in the mag and I would have that issue and it would try to double feed. showed it to carlos at BPP and he showed me it was a mag feeding issue.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top