HKPRO Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
98 Posts
Discussion Starter · #1 · (Edited)
Will these fit a hk94 and is it a good choice?

German Hensoldt FERO-Z24 scope or ZF 4x24 model 2 scope. with the STANAG 2424 claw mount.

IS ZF 4x24 scope model 2 best choice of the 2
Has a separate focus adjustment turret.
BEST for 9MM at close range?


FERO-Z24 scope $350.00
Model 3 (FERO-Z) has a larger diameter eyepiece and objective than the other two, and provision for the reticle illumination device.
No separate focus adjustment.
Click adjustment windage and elevation turrets w/BDC markings 1 click = 1 cm

ZF 4x24 scope model 2 $300.00

Model 2 (ZF4x24)has a straight tube and provision for the reticle illumination device.

Has a separate focus adjustment turret.
BEST for 9MM at close range?

No click adjustment windage and elevation turrets, only BDC range settings
different caliber cams for the Hensholt scope.

There are cams for .223 as well as the 9mm. dont know if available for FERO-Z24 scope



Thanks
 

·
Registered
Joined
·
98 Posts
Discussion Starter · #5 ·
Model 2 (ZF4x24) works Great

Put this on my hk94 works great.

Model 2 (ZF4x24)


Clear optics at 10-15 ft Has a separate focus adjustment turret. Just
turn it for the range you want

Has a straight tube and provision for the reticle illumination device.

Will have wait to see how it works at the range
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top