HKPRO Forums banner

Is the Elite barrel the same as the P30?

1126 Views 8 Replies 7 Participants Last post by  Wolvee
Yeah I know, odd question, but here's the background.

I sold my brother my .45 HK Elite and he loves it, so much so that he wants the Elite in the 9 mm version, too. However, since we live in CA it's not officially legal, but there is a loophole referred to as the SSE (Single Shot Exemption.) Basically, the FFL here temporarily replaces the barrel with a much longer one, sells you the pistol, then you turn around and ask them to remove it - all perfectly legal.

The catch is that this shop does not have a 9 mm Elite barrel, but does have a P30 barrel in 9 mm. So my question to the HK Experts is this: Is the lug-end on the 9 mm Elite barrel the same as the P30? Length doesn't matter, just whether it'll seat or not.
1 - 1 of 1 Posts

· Registered
Joined
·
2,739 Posts
No, the USP Elite barrel is not the same as the P-30 barrel. It may still seat, don't know without trying and I do not own many HK 9mm, just not my caliber, but even if it does seat it would be dangerous to fire it that way. I know your intention is to skirt the law, not fire the pistol, but either way IMO you are playing with fire.
I am a little bit at a loss about what you are trying to accomplish? He has the .45 Elite you sold him. What is he wanting to put the 9mm barrel in? Your .45 Elite? Or is he wanting a longer barrel to put in a P30? So is wanting to buy a P30 but it is not legal in CA? And you are trying to skirt the law by putting a longer barrel in the P30? If that is the case, then buy a longer ported barrel for the P30 ahead of time from EFK. Then take that to the dealer and let him put that in the P30, in that case you could even still shoot it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top