HKPRO Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
66 Posts
I use 4.1 grains of Hodgdon Clays under a Hornady 200 grain JSWC seated long to 1.277" in CCI brass/CCI primers.

Many people say the JSWC's won't feed in a USP, but if you seat them long they will. I've shot over a thousand rounds in my full size USP with this recipie and never had any trouble. Soft recoil and the brass doesn't go far.
 

·
Registered
Joined
·
124 Posts
I've tried 5.5 grns of Bullseye with 200 grn extreme plated rn at 1.250 oal. Another variant I use is 5.2 grns of WST with the same bullet weight. These loads are higher end pressure loads. If I wanted them softer I would put 4.7 grns of WST or 5 grns of Bullseye.

Bullseye is the cleaner shooting of the two powders, but a touch louder.
 
1 - 3 of 3 Posts
Top