HKPRO Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
91 Posts
Discussion Starter · #1 ·
Besides the extractor and hammer spring differences are there any other trigger pack differences for the 10 vs 9mm? All the housings should be the same right?
 

·
Premium Member
Joined
·
1,334 Posts
coho242

Burst trip lever

The pointy end of the trip lever is cut off on the 40/10 MP5's as shown in the pic above. This is done to keep the pointy end from impacting the rear of
mag due to the potentially heavy recoil momentum of the ammo being used.
 

·
Registered
Joined
·
91 Posts
Discussion Starter · #4 ·
The housing needs to have a cutout on the left side for the bolt hold-open mechanism.
Can I assume that a 40/10 housing from HKParts would have the cut out? I know the forks for the retractable need to adjust for that. Wasn't aware on the housing.
 

·
Registered
Joined
·
1,718 Posts
Yes the 40/10 housing from hkparts will have the proper cut out.
 
1 - 6 of 6 Posts
Top