HKPRO Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
My P2000SK .40 seems to have developed a triggier issue. It's most noticable in SA, where there is a long creep before the trigger breaks, and during this, the decocker torques and moves as though the action is loose. Can't remember it doing this, and I'm wondering if this is normal, or is there something broken.
 

·
Premium Member
Joined
·
915 Posts
Do You feel it with the slide off the frame, too? If so, what lubricant are You using? Try to REALY clean the area in front of the hammer, and lube the bars there with some very light oil. I think they might be just catching on each other, instead of sliding freely side to side.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #3 ·
Lub the action with Breakfree, and the slide/barrel assembly with tinny bit of Rig +P and Breakfree. I've even tried over lubricating the action to the point it ran out a litte, and this hasn't changed this.

And yes, the action acts the same without the slide on the pistol.
 
1 - 3 of 3 Posts
Top