HKPRO Forums banner

P30 LEM conversion. Any good news about that?

1535 Views 8 Replies 7 Participants Last post by  KMKP7KING
After reading the thread and watching the videos about the LEM conversion of the HK45/c and beeing overwhelmed, I wanted to ask if there are any good news about the P30 LEM.

Either from H&K or home made solutions.
Most important thing for me would be a shorter trigger reset.
1 - 2 of 2 Posts

· Requiescat In Pace
Joined
·
1,070 Posts
While home on Christmas leave, I converted my HK45C to an LEM. I utilized all the same springs from my DA/SA set-up minus the sear spring, and the trigger is a real beauty now.

It took me a little over an hour as I didn't have the right tools (punches and hammer), inadvertantly left a piece out, and had to be as quiet as possible as my 2yr old was sleeping in the next room.

Minus my brainfart with omitting one piece and having to disassemble again, it was ridiculously easy with the tutorial provided on the site. I'll see if I can find it and post.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top