HKPRO Forums banner

P30SK with Crimson Trace CMR-201 Laser question

2104 Views 4 Replies 5 Participants Last post by  AGG
New to the forum.

Has anyone had success mounting a Crimson Trace CMR-201 Rail Master Universal Laser Sight to the P30SK?

When I picked mine up from the dealer, I asked if he could see about mounting one. The instructions said to use either the #1 or #3 mounting spacer. He attempted both sizes, the sight activation switch sat about 1/4" forward of the trigger guard, and we were concerned about the activation switch snagging and possibly breaking off, so I passed on the laser. If you have mounted this laser, and were able to get the activation switch closer to the trigger guard, can you please post a close up picture and which mounting spacer you used.

I am also curious if I could modify the activation switch after moving the laser closer to the guard with another mounting spacer.

I like the size of the CMR-201, so if it can't be moved closer to the trigger guard, I would be open to other laser options that are similar size or smaller if anyone has any suggestions. Pictures would be appreciated, so I can visualize the setup.

Thanks.

HKLBRY
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top