HKPRO Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter · #1 ·
Does anyone have experience with running a can with an arm brace/stock on a reverse stretch like a POF 5pk? I’m aware that you should use the 80 degree LP with a k, but can’t find any info on a reverse stretch. Should I be worried about accelerating wear? I’ve run about 500 flawless 147gr rounds thru the pof suppressed with the standard 100 LP...? Any info appreciated!
 

·
Banned
Joined
·
183 Posts
Use stock locking piece. Carrier and receiver are full size. Barrel is short. K has a shorter carrier and receiver. 80* locking piece would only be used on a k length gun if you are suppressing AND running subs. But again, your gun is full size.
 

·
Registered
Joined
·
4 Posts
Does anyone have experience with running a can with an arm brace/stock on a reverse stretch like a POF 5pk? I’m aware that you should use the 80 degree LP with a k, but can’t find any info on a reverse stretch. Should I be worried about accelerating wear? I’ve run about 500 flawless 147gr rounds thru the pof suppressed with the standard 100 LP...? Any info appreciated!
Use the stock locking piece. The 80 is for K model sin
 
1 - 4 of 4 Posts
Top