HKPRO Forums banner

Possible Issue with P2000

1K views 7 replies 6 participants last post by  III The Chad III 
#1 ·
Several weeks ago I set about seeing how difficult it would be to remove the magazine disconnect from my P2000. It turned out to be a little more complicated than I thought it would be and I decided not to do it. After finding out I would need to completely remove my trigger bar, I decided to put everything back together and leave things as they were. I noticed a couple days ago that the mag disconnect no longer works. Best I can figure is that I didn't put it back together correctly. The weapon still functions 100%, but I have the pieces in for a mag disconnect and they aren't working. Do you guys think it's ok to keep the mag disconnect pieces in there even though they aren't working? The only reason I don't want to do this, is this is my CCW piece and I wouldn't want it to not work when I need it most.
 
#4 ·
#5 · (Edited)
Dude...Chad....

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top