[JTinIN]

Cleaning up in the shop and thinking that maybe a few items that have extras and/or have not been out since before Y2K might need to find a new home some day ... then again could always use another belt gun (this will take a lot of cleaning ;-).

Items for a price check:
- SG1 stock (308)
- MSG90A1 stock (TD conversion of MSG90)
- PSG1 trigger pack and grip (complete trigger housing*)
- Heavy buffers - HK
- HK scope mount for SG1 (?) - claw mount with front ring offset foward (30mm)
- HK X4 power scope in green case - $400?
- FMP (?) HK91 parts kit with barrel
- HK91 - $1995?
- "SG1" stock (223)
- HK93 barrel take off
- G33 barrel take off (15.5" OAL)

 

[nat91683]

PM sent

 

[JTinIN]

PM sent

Thanks and you are correct need to do some more photos for anyone to be able to give any type of fail call.

-----

Been cleaning up a little this year, too many long term projects that are not getting down and/or replaced by other overlapping projects. The better scoped HK91 and the HK91 sear host (have just been using friend's HK91, sear and his ammo in the past ... with him of course ;-) being two of the projects that have not gotten to, along with the Barrett M81A1 leaving (the Sako TRG42 338LM was just too much more accurate and still worked at a mile, as long as did not need the AP or API ;-), Shrike (replaced by MM23eK) and lastly shooting friends' 21e which worked a lot nicer than the old 21s. Have second thoughts on both projects due to the 21e plus have a case of belt flue with water cooled complications ;-), plus even with house keeping have too many 308 MBRs taking up room that could better be used ;-). Add to this a new start up company and appreciate if everyone tolerates my checking on prices well in advance of taking photos, setting prices and selling if I decide that is the way to go ... plus one of the guys sent me an XS drum to try out this summer so that is another compilation.

 

[toku58]

MHO!

Items for a price check:
- SG1 stock (308) ~$350-$375 depending on condition
- MSG90A1 stock (TD conversion of MSG90) ~Not sure if you're talking about a stock like mine? But I would value it at about $400
- PSG1 trigger pack and grip ~Probably looking at $600-$700
- Heavy buffers - HK ~Depending on which model? But about $120ish
- HK scope mount for SG1 (?) - claw mount with front ring offset foward (30mm) ~If it's like the one on my rifle then about $375

 

[JTinIN]

MHO!

Items for a price check:
- SG1 stock (308) ~$350-$375 depending on condition
- MSG90A1 stock (TD conversion of MSG90) ~Not sure if you're talking about a stock like mine? But I would value it at about $400
- PSG1 trigger pack and grip ~Probably looking at $600-$700
- Heavy buffers - HK ~Depending on which model? But about $120ish
- HK scope mount for SG1 (?) - claw mount with front ring offset foward (30mm) ~If it's like the one on my rifle then about $375

toku58 Thanks! that is exactly what I was looking for, should have used your photo with arrows or even better just e-mailed you and save the bandwidth and getting everyone's expectations up if I don't clean house to fit in another belt fed ;-).

 

[bluetwister]

"HK scope mount for SG1 (?) - claw mount with front ring offset foward (30mm) ~If it's like the one on my rifle then about $375

FYI gentleman, that is a standard mount, for all the steel receiver rifles. . It was cataloged as " Mount, Claw Lock snap on, 30mm rings with 1" inserts" it was the default mount we sold for the 91 and 93, very few were bought for the 94, actually it was the only mount we sold until the A.R.M.S. mount was developed by **** Swann, which we eventually carried as a cheaper and much more versatile alternative.

 

[JTinIN]

"HK scope mount for SG1 (?) - claw mount with front ring offset foward (30mm) ~If it's like the one on my rifle then about $375

FYI gentleman, that is a standard mount, for all the steel receiver rifles. . It was cataloged as " Mount, Claw Lock snap on, 30mm rings with 1" inserts" it was the default mount we sold for the 91 and 93, very few were bought for the 94, actually it was the only mount we sold until the A.R.M.S. mount was developed by **** Swann, which we eventually carried as a cheaper and much more versatile alternative.

Thanks for the background and history. I was trying to differentiate from the German Army Surplus mounts also.

 

[U.S. Praetorian]

Umm, typo error in title. LOL

 

[JTinIN]

Umm, typo error in title. LOL

Thanks - missed that one but it's taken care of.