HKPRO Forums banner


1407 Views 5 Replies 4 Participants Last post by  sage1
I want to use the light hammer return spring and light firing pin block spring in my P2000 SK LEM. I also want to use a 12lb hammer spring. The P30 apparently uses a 12 lb hammer spring, but I don't think it will work in the SK model. Does anybody know who makes a quality 12 lb hammer spring for the SK model?
1 - 3 of 6 Posts
Thanks, I was wondering if that was the case. only list one hammer spring (HKP-2598) on their site for the P2000 SK and they don't differentiate between DA/SA, or LEM. I will call tomorrow and ask.
You would have to compare part #'s but I would think the P2000sk hammer spring from a V3 DA/SA version would be lighter than the stock LEM version. That is typically how it is.
I called and they only list one hammer spring for both versions of the P2000 SK. It looks like the V1 DA/SA and V2 LEM use the same hammer spring.
1 - 3 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.