HKPRO Forums banner
1 - 3 of 7 Posts

· Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
A newbie question - should I oil the barrel of the ptr 91 gi? I usually put a couple drops of m-pro 7 gun oil down the barrel (after cleaning with gun cleaner), then push through an oiled cleaning patch, and then a dry patch. Pretty much the same thing as with my P30L. The dry patch has a little bit of green oil on it after I push it through, but it is not covered in it. Did I do this right, or not? These are my first guns and my knowledge is very limited, so go easy on me :)

By the way, I tried using the search and only found information about lightly oiling parts (barrel not mentioned specifically) and the barrel issues of the earlier series. Information from other sources noted that some rifles need to be oiled and some do not...
 

· Registered
Joined
·
9 Posts
Discussion Starter · #4 ·
If you put gun oil in the barrel, do you then run a dry patch before shooting? The explanation I have seen for the USP is that if you do not, the oil will cause excessive pressures and possibly damage the barrel.
 
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top