HKPRO Forums banner
Status
Not open for further replies.
1 - 20 of 45 Posts

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #1 · (Edited)
INDEX - Click for quick jump to post

1) The new Miller TIG ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1114394
2) Randomness ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1114398
3) SL8 to G36C conversion ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1114478
4) D54KP-N Reverse-Stretch ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1114478
5) D54-SD ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1114478
6) D51P ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1124562
7) HK93 to HK33K conversion ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1124876
8) D54KP-N ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1125713
9) D34 ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical.html#post1164169
10) The classic D54P ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html
11) D54P 3-in-1 ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html
12) New SL8 to G36 remarking template ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1215937
13) SWR Octane 9 HD with D54P-N and HK UMP 9 ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1215937
14) MKE 94K rebarrel and clean-up ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1217526
15) D54P/10 Preview ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1228831
16) Randomness ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1229788
17) D53P ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1241388
18) Fleming RR HK94 to MP5-N SOPMOD Conversion ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1263373
19) FMP G3 clone ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-2.html#post1267298
20) MR556 barrel job ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1307634
21) Cookies anyone? ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1308820
22) G3 custom build ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1308820
23) D54P-SD replica SD ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1310066
24) D54KP-N ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1321357
25) D54P/10 ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1324084
26) D54KP Reverse-Stretch ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1330825
27) D33KP from German Parts Kit ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1332037
28) D33KP from Malasian Parts Kit ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1334026
29) My kind of 6-pack ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-3.html#post1345410
30) What's in your oven? ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1345410
31) Another boring day of testing ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1354288
32) We're on Instagram! ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1375204
33) Long days ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1377394
34) A few more from our Instagram ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html.html#post1383278
35) Dime-roll please ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1383278
36) The Happy Factory ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1383278
37) The new D54P/40 ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1415508
38) D54P for Jason Koon, Capt. HK Shooting Team ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1495092
39) From the current queue ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-4.html#post1497015
40) USC to UMP conversion ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-5.html#post1497728
41) Custom D51P for Austin Weiss ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-5.html#post1498094
42) From the D31 build batch ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-5.html#post1517612
43) Some random projects finished up and other photos from my Instagram feed ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-5.html#post1558041
44) DTAC MHS-5ML M-LOK compatible handguard ---> http://www.hkpro.com/forum/dakota-tactical/149582-gallery-dakota-tactical-5.html#post1729051
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #2 · (Edited)
The new Miller TIG

I REALLY like the new TIG welder. At some point I'll add the pulser option to it, but for now I'm really happy with how easy it makes welding.
Here are some photos of my new rear sight base and throat welds. Also the cleaner cocking tube welds.

(click to enlarge)
Gun Trigger Shotgun Air gun
Auto part Muffler Automotive exhaust
Auto part Pipe Metal
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #3 · (Edited)
Randomness

Here are a couple more...
Custom engraving on a 3-lug barrel extension and an A2 stock buffer upgrade for use on .40 and 10mm guns.

(click to enlarge)
Font Material property Pipe Electronic device Cylinder
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #4 · (Edited)
SL8 to G36C conversion

Here's an SL8 to G36C conversion w/ faux silencer (two different styles). The nice thing with particular conversion is that the barrel is 16.5" and the faux silencer is a solid slip over shroud so it can be removed for easy removal of the handguard.

(click to enlarge)
Firearm Gun Trigger Rifle Airsoft
Gun Firearm Trigger Airsoft Airsoft gun
Technology Airsoft Vehicle Trigger Car
Gun Firearm Rifle Trigger Airsoft
Gun Trigger Shotgun Revolver Airsoft
Gun Firearm Trigger Airsoft Airsoft gun
Camera accessory Optical instrument Room Photography Cameras & optics
Gun Airsoft Trigger Airsoft gun Air gun
Gun Firearm Trigger Airsoft Revolver
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #5 · (Edited)
D54KP-N Reverse-Stretch

This is known as a "reverse-stretch". It is available as a pistol or short-barreled rifle in 9mm and soon .40 S&W, 10mm and .357 SIG.
The RS features a "K" front end with standard full-length receiver.
The benefits to this is a firearm is the compact muzzle of a K-gun with stock and sling options of a full-sized.
While the RS design has been around for many years, we teamed-up with HKParts.net to re-introduce this platform to use readily available replacements parts for ease of serviceability.

Shown with optional Surefire M77 forend
(click to enlarge)
Firearm Gun Trigger Airsoft Airsoft gun
Firearm Gun Trigger Airsoft Air gun
Gun Firearm Trigger Assault rifle Airsoft
Firearm Gun Trigger Airsoft Air gun
Font Vehicle Electric blue Automotive exterior Car
Gun Firearm Assault rifle Rifle Airsoft
Gun Bumper Trigger Airsoft gun Air gun
Gun Firearm Air gun Trigger Revolver
Auto part Vehicle
Gun Trigger Airsoft Bumper
Vehicle Car Auto part Engine
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #6 · (Edited)
D54-SD

Here's the debut of the D54-SD A3 shown with post-sample trigger pack. It is also available as the D54P-SD (pistol). Admitedly, some of the cage welds came out a bit larger than I wanted but overall I am very happy with the final. It's finished in Duracoat which I am still working on elimiating some of the texture. I think my next step is a different spray gun. The cocking tube supprt has been carefully milled to allow fitting of the various oversized SD silencers that are available. No milling is necessary when using the original aluminum SD silencers which have a slightly smaller diameter than the current ones. As always, everything gets refinished, even the push-pin :)

Thanks for your on-going support! Enjoy!

(click to enlarge)
Firearm Gun Trigger Airsoft Air gun
Firearm Gun Trigger Rifle Assault rifle
Firearm Gun Rifle Trigger Assault rifle
Vehicle
Gun Firearm Rifle Airsoft Trigger
Gun Firearm Trigger Airsoft Gun accessory
Gun Airsoft Air gun Airsoft gun
Airsoft Camera accessory
Cutting tool
Gun Trigger Airsoft Gun accessory Air gun
Shotgun Airsoft
Carbon Cylinder
Gun Airsoft Trigger
Tool accessory
Material property Shotgun Metal
Rim Shotgun
Material property Rim
Keychain Fashion accessory Metal
Black-and-white Photography Stock photography Still life photography Monochrome photography
Airsoft
Metal Steel
Bumper
Bumper Auto part Automotive exterior
Automotive exterior Bumper Auto part
Auto part Personal protective equipment
Automotive exterior Bumper Electronic device Rim
Shooting sport Circle Recreation Shooting Precision sports
Shooting sport Target archery Recreation Circle Shooting
White Text Font Paper Art
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #7 · (Edited)
D51P

Here's the D51P (shown with post-sample trigger pack and A2 stock). It features the new RCM 51 cold hammer forged barrel chambered in 7.62 NATO. We've improved this platform so that is uses a standard G3 locking-piece, rendering it extremely controllable.

Firearm Gun Trigger Airsoft Air gun
Gun Trigger Air gun Shotgun Gun barrel
Gun Firearm Rifle Trigger Air gun
Gun Auto part Trigger
Bumper Technology Automotive exterior Auto part Electronic device
Product Bicycle part Bicycle drivetrain part Auto part Carbon
Gun Metal
Material property Bicycle part Rim
Shotgun Material property
Automotive exterior Auto part
Shotgun
Rim Bicycle part
Product Bicycle part
Revolver Shotgun Metal Steel
Photography Auto part Wheel
Bumper Automotive exterior Auto part Automotive window part
Airsoft Air gun
Product Photography Personal protective equipment Metal Plastic
Firearm Gun Rifle Trigger Air gun
Firearm Gun Trigger Rifle Ranged weapon
Gun Trigger Auto part Air gun Shotgun
Technology Electronic device Gadget
Keychain Black Fashion accessory Hand Photography
Gun Camera accessory Monocular Airsoft Photography
Auto part
Personal protective equipment
Product Automotive exterior Technology Photography Electronic device
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #8 · (Edited)
I was recently given the honor of converting a pre-86 registered receiver push-pin HK93 to an HK33K for investment purpose. The owner secured a factory HK33K 1:7 twist barrel with front sight tower attached so I thought it be appropriate to press the barrel at the correct timing so that the barrel not need to be rotated and the front sight tower re-aligned. For maximum investment value in a firearm such as this, it was important that the barrel markings stay in the correct location and that the triple-frame eyebolt retain the factory press for factory correct asthetics. I used an oversized barrel pin and cut the recessed center in the ends for additional authenticity. Model and caliber remark to top it off. Enjoy!

Firearm Gun Trigger Rifle Assault rifle
Firearm Gun Trigger Rifle Assault rifle
Product Auto part
Shotgun
Cameras & optics Camera Camera accessory Vehicle Car
Gun Revolver Shotgun Trigger Gun accessory
Airsoft
Product Material property Muffler Auto part Pipe
Gun Firearm Rifle Trigger Shotgun
Airsoft Monocular Optical instrument
Gun Airsoft Air gun Trigger Gun accessory
Gun Firearm Trigger Gun accessory Gun barrel
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #9 · (Edited)
D54KP-N

Here is the D54KP-N (show with post-sample SEF trigger pack in PDW configuration). Built on an LSC 9mm flat that we convert to K-spec with the HKParts.net weldment kit. It features RCM front-end with RCM bolt-group, RCM 100-degree locking piece and our own Dakota Tactical stainless steel K recoil rod. You can see videos of this firearm on our YouTube channel. Thanks for looking!

(click to enlarge)
Firearm Gun Trigger Assault rifle Rifle
Firearm Gun Trigger Assault rifle Rifle
Gun Firearm Airsoft Air gun Machine gun
Gun Air gun Airsoft gun Cylinder
Gun Firearm Airsoft Trigger Air gun
Gun Trigger Air gun Airsoft Machine
Firearm Gun Trigger Airsoft Gun accessory
Material property Rim Metal
Gun Firearm Trigger Air gun Shotgun
Camera accessory Camera Single-lens reflex camera Cameras & optics Photography
Gun Firearm Airsoft Air gun Trigger
Cylinder Tool accessory Metal Tool
Personal protective equipment Monocular
Auto part
Camera accessory Footwear Personal protective equipment Photography Bicycle part
Shotgun Metal
Metal Steel Pipe
Auto part
Gun Firearm Trigger Air gun Airsoft gun
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #10 · (Edited)
D34

This is the D34 9mm carbine. Barrel length is just over 16" with pinned flash-hider. It is also available as a pistol, the D34KP with removable flash hider. Its longer barrel length offers higher muzzle velocity and is ideal for those who are looking for a Title-1 9mm carbine without pinning an 8" faux silencer.

The 34-type firearm is a product of U.S. enginuity. I am unsure who built the first 34, but I believe it was Special Weapons. There have been many variations of how this firearm is built. Some extend the cocking tube and/or barrel out a little bit longer to utilize a G3/HK91 length handguard. Some use an HK33/HK93 type cocking tube and sleeve it to accomodate the shorter stroke of the 9mm caliber.

I have chosen to extend the 9mm cocking tube in order to preserve the orginal asthetics of a proper 9mm firearm. I also chose the HK33/HK93 length handguard. You will see below is how I trim the back to give better asthetic balance and proper clearance for the claw-mount tabs. I think a aluminum picatinny railed handguard would look really sharp on this model. I also opted to use a G3 front sight tree as it allows for a slightly shorter flash hider. I felt that this also aids in better asthetic balance.

Thanks for looking!

(click to enlarge)
Gun Firearm Trigger Rifle Assault rifle
Shooting sport Shooting Circle Recreation Electronics
Material property Bumper Rim Automotive exterior Vehicle
Gun Firearm Trigger Airsoft Air gun
Electronics Airsoft Vehicle Car
Airsoft Monocular
Gun Airsoft Airsoft gun Air gun Monocular
Gun Firearm Airsoft Trigger Airsoft gun
Gun Air gun Airsoft
Cylinder Metal Steel
Material property
Shotgun
Gun Rifle Airsoft Trigger Air gun
Gun Air gun Gun barrel
Auto part Automotive exterior Bumper
Auto part Tool
Bumper Automotive exterior Auto part Automotive window part
Product Auto part Automotive engine part
Product Auto part
Gun Trigger Airsoft Shotgun Gun barrel
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #11 · (Edited)
The Classic D54P

I realized that I did not have a good photo set of the D54P. Fresh from the last batch, here's one shown with post-sample trigger pack in an SEF contour grip frame with A2 stock. You'll notice the Dakota Tactical logo in the photo with the model number shown. I did this on a few D54P's in this batch to see how it would look. Thanks for looking :)

(click to enlarge)
Firearm Gun Trigger Rifle Assault rifle
Firearm Gun Trigger Airsoft Gun accessory
Shotgun
Auto part Material property Muffler Automotive exterior Vehicle
Auto part Airsoft Metal
Gun Automotive exterior Airsoft Bumper Metal
Airsoft Airsoft gun Trigger
Airsoft Auto part
Metal Steel Pipe Roof Automotive exterior
Gun Firearm Trigger Airsoft gun Machine gun
Material property Automotive exterior Auto part
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #12 ·
D54P 3-in-1

Another 3-in-1 @ 30 ft, YAY! 115gr. FMJ reloaded ammunition

(click to enlarge)

Gun Shooting sport Shooting Trigger Air gun
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #13 · (Edited)
New SL8 to G36 remarking template

Here's the new layout for remarking SL8's when doing G36 conversions.
Shout out to Gerg Penning for his work on vectorizing the necessary clipart for the proof marks. Thanks Gerg!

(click to enlarge)

Airsoft
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #14 · (Edited)
SWR Octane 9 HD with D54P-N and HK UMP 9

(click to enlarge)

Gun Firearm Trigger Rifle Machine gun
Gun Firearm Trigger Air gun Airsoft
Product Eyewear Material property Hair dryer Microphone
Monocular
Firearm Gun Rifle Trigger Assault rifle
Gun Airsoft Trigger Airsoft gun Air gun
Airsoft
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #15 · (Edited)
MKE 94K rebarrel and clean-up

Did this one a while back for a member but figured I would add the old photos to the Gallery. I've done many of these. Some conversions while others merely just clean-up. While it is ultimately user preference, the correct rear sight drum for a K-gun configured as a pistol is the low-profile castle type. When in PDW configuration (stock added), the preferred rear sight drum is the traditional MP5 diopter type. This example is from my powder-coating era which has been replaced with DuraCoat.

(click to enlage)
Camera accessory Cameras & optics Photography Auto part Camera
Bumper Auto part Rim Pipe Metal
Gun Firearm Trigger Revolver Shotgun
Car Vehicle
Metal
Product Photography Personal protective equipment
Shotgun Airsoft Airsoft gun
Gun Firearm Revolver Shotgun Trigger
Gun Airsoft Airsoft gun
Gun Firearm Trigger Airsoft Air gun
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #16 ·
D54P/10 Preview

For the upcomming D54P/40 and D54P/10 batch. Here's a photo of my new 10mm caliber stamp and a couple of photos of the first D54P/10 test gun. My nephew is editing video of the test fire which I will post when he is done.

(click to enlarge)

Firearm Gun Trigger Rifle Assault rifle
Firearm Gun Trigger Rifle Assault rifle
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #17 ·
Randomness

I've got a short break in servicemen orders so I'm resuming the D5xP queue. Here's the current batch, many of which are for HKPRO members. So hang in there guys, they're on their way :)

And yep, those are the packs for all the guns I have to build... yikes!

(click to enlarge)

Cutting tool Tool accessory Metal Machine
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #18 ·
D53P

This is the D53P shown with SEF post-sample trigger pack and A3 stock. Built from an HK53 parts kit on a Vector/SW pre-rolled but not welded receiver, fully parkerized and finished with HK Black DuraCoat. Internals, rear sight and all small parts were refinished as well. Thanks for looking.

(click to enlarge)

Gun Firearm Rifle Trigger Assault rifle
Gun Firearm Rifle Trigger Assault rifle
Gun Firearm Trigger Machine gun Air gun
Auto part Vehicle Automotive exterior Bumper Car
Auto part Monocular
Product Bumper Automotive exterior Auto part Metal
Pipe Material property Cylinder Metal Steel
Auto part
Bumper Automotive exterior Vehicle Auto part Car
Automotive exterior Bumper Auto part
Airsoft gun Automotive window part
Automotive exterior Bumper Auto part Pipe Metal
Gun Air gun Gun barrel Trigger Shotgun
Auto part
Airsoft Auto part Monocular
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #19 ·
Fleming RR HK94 to MP5-N SOPMOD Conversion

Recently took in a Fleming pre-86 registered receiver HK94. The orginal SOPMOD kit as I understand came with a Choate-style side-folding stock however the owner of this firearm opted for the MP5-F stock instead. We installed an RCM MP5-N barrel, HK Navy lower with ESSL, HK VFG, paddle mag release, our Premium refinish service and dressed it with a KAC RAS and optic rail system.

(click to enlarge)

Firearm Gun Trigger Airsoft Air gun
Firearm Gun Trigger Rifle Airsoft
Gun Airsoft Monocular Auto part Airsoft gun
Gun Firearm Assault rifle Airsoft Trigger
Camera accessory Photography Cameras & optics
Camera accessory Cameras & optics Camera Lens Video camera
Firearm Gun Trigger Airsoft Air gun
Gun Firearm Rifle Airsoft Air gun
Gun Airsoft Trigger Airsoft gun Air gun
Firearm Gun Trigger Airsoft Air gun
Vehicle Camera Automotive exterior Cameras & optics Car
 

·
Vendor
Joined
·
8,239 Posts
Discussion Starter · #20 ·
FMP G3 Clone

This FMP G3 clone was built on an FMP receiver using a genuine FMP G3 parts kit (with 922r compliance parts). Custom model and caliber marking done on left magwell with Rad-Lock installed for California compliance.

(click to enlarge)

Gun Rifle Firearm Trigger Gun barrel
Auto part Transmission part
Automotive exterior Vehicle Bumper Auto part Car
Firearm Gun Trigger Gun accessory Air gun
Shotgun
Gun Trigger Revolver
Firearm Gun Rifle Trigger Air gun
 
1 - 20 of 45 Posts
Status
Not open for further replies.
Top