HKPRO Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hi Guys,
Where can one get the exact tools to take apart or replace firing pin, extractor etc? Somewhere I read about a plastic allen tool , who sells them and what size is required for all the ones needed for USP45F?
Thanks in advance!
 
L

·
Guest
Joined
·
0 Posts
Hi Guys,
Where can one get the exact tools to take apart or replace firing pin, extractor etc? Somewhere I read about a plastic allen tool , who sells them and what size is required for all the ones needed for USP45F?
Thanks in advance!


to access the extractor, firing pin, spring, etc; you need to remove the corresponding roll pins with a Punch. they are located on top and under the slide.

a 1/8"th standard punch will work for all, but i highly reccomend you eventually pick up a roll pin punch. this keeps the pin straight by providing more support to the inside of the pin.

http://www.outdoorsuperstore.com/product.asp?prod=286078

please be sure to fully read the manual before beginning.

remember; the firing pin will NOT come out unless you fully depress the firing pin block first...
 
1 - 2 of 2 Posts
Top