HKPRO Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,407 Posts
There are only two hammer springs. One for pistol and one for rifle. I have a rifle spring that is a bit shorter than normal, almost like they cut a winding off of it. I use it for every caliber. 9mm - .308 and it works fine.

I only change out the ejector lever when changing calibers. Also, I have found that the 53 and 33 ejector levers are interchangeable, even though the 53 is cut to a shorter length. I've used the factory 53 lever in my HK 93, C93 and V93. I've also used the HK33 lever in my V53 and CA53AR.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top