Joined
·
82 Posts
Going on the 3rd year of carrying this VP9L for duty, guess it’s officially 3 years total around April(ish). Thanks for reporting me as a scammer. Sorry my math was off by a year and sorry I posted too much in too short a period of time. By the way “the pics from the net” are my pictures that I took of my Guns. and if you look at the username from the one on F-150 Forum it’s magically the same as mine.
Ordered the VP9L the day it was released and immediately sent it off to be milled for an RMR by Primary Machine. Did a ton of research ahead of time because I wanted the deepest milling available that still had recoil bosses. Got the tallest non-suppressor height sights available because the VP9 suppressor height sights are just way too tall in my opinion (Heinie and Trijicons).
Been using RMRs on handguns for duty use for close to 5 years now. Started with Glock 34 and transitioned to HK at the release of the VP9L. On occasion (Fridays here and there), I rock a Staccato P Duo. And off-duty, I rock a VP9OR with Lazy Wolf MRAP trigger work (4.5lbs) or (gasp) a Glock 48 MOS with a Holosun 507K, or even a J frame.
also just added a VP9 Match to the stable. All of my VP9s are B models (helped with transition from Glock) and the two standard VP9ORs pictured have mismatched serial numbers due to having to build a VP9-B OR since they don’t exist.
![Trigger Air gun Gun barrel Gun accessory Nickel]()
![Air gun Trigger Line Gun barrel Gun accessory]()
In case anyone wants any of the data regarding depth of milling from various companies here it is. I ended up doing Primary Machine even though they were only second deepest because they offered traditional recoil bosses and PMM didn’t offer traditional recoil bosses (and instead has them around the screw threads/posts). The top of the note has the heights of the Dawson sights I used.
![Brown Handwriting Rectangle Font Material property]()
Ordered the VP9L the day it was released and immediately sent it off to be milled for an RMR by Primary Machine. Did a ton of research ahead of time because I wanted the deepest milling available that still had recoil bosses. Got the tallest non-suppressor height sights available because the VP9 suppressor height sights are just way too tall in my opinion (Heinie and Trijicons).
Been using RMRs on handguns for duty use for close to 5 years now. Started with Glock 34 and transitioned to HK at the release of the VP9L. On occasion (Fridays here and there), I rock a Staccato P Duo. And off-duty, I rock a VP9OR with Lazy Wolf MRAP trigger work (4.5lbs) or (gasp) a Glock 48 MOS with a Holosun 507K, or even a J frame.
also just added a VP9 Match to the stable. All of my VP9s are B models (helped with transition from Glock) and the two standard VP9ORs pictured have mismatched serial numbers due to having to build a VP9-B OR since they don’t exist.
In case anyone wants any of the data regarding depth of milling from various companies here it is. I ended up doing Primary Machine even though they were only second deepest because they offered traditional recoil bosses and PMM didn’t offer traditional recoil bosses (and instead has them around the screw threads/posts). The top of the note has the heights of the Dawson sights I used.
